[step-manufacturing] Questions from DMG Mori for the conference call today

Wed Mar 28 08:07:15 EDT 2018

All

See below for some questions from DMG Mori that we should discuss in the 
conference call later today.

Martin

-------- Forwarded Message --------

Hi Martin,

Of Course You can forward my E-Mail the members of the wg15 team.

Best regards Daniel

Von meinem iPhone gesendet

*--*

*Follow us:*

<https://www.linkedin.com/company/dmgmori> 
<https://www.facebook.com/dmgmori> <https://twitter.com/dmgmorieu> 
<https://www.instagram.com/dmgmori/> <https://www.youtube.com/dmgmori>

DMG MORI Software Solutions GmbH
Sitz der Gesellschaft: Pfronten; Amtsgericht Kempten (Allg.), HRB 9572
Geschäftsführer: Dr. Holger Rudzio
Ust-Id-Nr: DE 256219491 - Steuer-Nr: 349 / 5723 / 2713

Am 27.03.2018 um 18:40 schrieb Martin Hardwick <hardwick at steptools.com 
<mailto:hardwick at steptools.com>>:

> Hi again Daniel,
>
> My apologies for your problems loading NC.js. We had checked-in some 
> of the updates necessary for your demonstration, but not all.
>
> All the changes are now checked-in and I was able to install and build 
> the system on my box.
>
> You will need a license key in order to run the software. You will be 
> directed on the key request steps by the installation process when you 
> get there.
>
> Our contact at Sandvik is Bengt Olsson (bengt.olsson at sandvik.com). He 
> has just left for a two week vacation, but they are arranging a bigger 
> support team for this project. So more news shortly.
>
> I think the other items are matters that we should discuss on the 
> conference call tomorrow.
>
> Will it be OK if I share your e-mail with the WG15 team before the call?
>
> Martin
>
>
> On 3/27/2018 5:29 AM, Niederwestberg Daniel wrote:
>>
>> Hello Martin and David,
>>
>> thanks for all the information. We all arrived at home safely. Flight 
>> was long, but okay. For the next steps, we need some more information.
>>
>> Server, MT-Connect Backup:
>>
>> ·I tried to set up a local server for the digital twin as described 
>> in the documentation, but failed during “npm run make”.
>>
>> onpm ERR! code ELIFECYCLE
>>
>> onpm ERR! errno 1
>>
>> onpm ERR! NC.js at 2.0.0 make: `webpack --progress --bail && node 
>> src/server/api_server.js -n`
>>
>> onpm ERR! Exit status 1
>>
>> onpm ERR!
>>
>> onpm ERR! Failed at the NC.js at 2.0.0 make script.
>>
>> onpm ERR! This is probably not a problem with npm. There is likely 
>> additional logging output above.
>>
>> o
>>
>> onpm ERR! A complete log of this run can be found in:
>>
>> onpm ERR! 
>> C:\Users\niederwd\AppData\Roaming\npm-cache\_logs\2018-03-27T09_27_07_834Z-debug.log
>>
>> ·Do we need a license? Or should we make a skype-meeting to solve this?
>>
>> ·What are our next steps for the MT-Connect adapter? I think in the 
>> first step we need the description what data have be sent by the 
>> stream (.xml file). How do we get your extended MT-Connect adapter?
>>
>> ·Further we need the backup of the DMG DMU 85 monoblock from Boeing 
>> to have a look at the detailed software status of the machine and all 
>> cycles...
>>
>> Schedule for programming and testing:
>>
>> ·Contact to involved Sandvik people possible?
>>
>> ·Discussion with Sandvik regarding NC programs for Fishhead stages 
>> required. Is this acceptable?
>>
>> ·When will tooling be available for us?
>>
>> Measuring:
>>
>> ·Shall measuring be done within the process for tool path correction 
>> or only after machining to measure results?
>>
>> ·Renishaw Productivity+ is known to us from customer projects, 
>> however it is not appropriate for us to be used for this project.
>>
>> ·DMG MORI will program with measurement cycles based on Janus with NX 
>> CAM.
>>
>> Best regards
>>
>> Daniel
>>
>> Mit freundlichen Grüßen / Kind regards
>>
>> -- 
>> Dr.-Ing. Daniel Niederwestberg
>> Teamleiter Digital Twin
>>
>> DMG MORI Software Solutions GmbH
>> Gildemeisterstr. 60
>> DE-33689 Bielefeld
>>
>> Tel.:
>> Mobile: +49 151 5825 7677
>> daniel.niederwestberg at dmgmori.com 
>> <mailto:daniel.niederwestberg at dmgmori.com>
>> www.dmgmori.com
>>
>> *--*
>>
>> *Follow us:*
>>
>> <https://www.linkedin.com/company/dmgmori> 
>> <https://www.facebook.com/dmgmori> <https://twitter.com/dmgmorieu> 
>> <https://www.instagram.com/dmgmori/> <https://www.youtube.com/dmgmori>
>>
>> DMG MORI Software Solutions GmbH
>> Sitz der Gesellschaft: Pfronten; Amtsgericht Kempten (Allg.), HRB 9572
>> Geschäftsführer: Dr. Holger Rudzio
>> Ust-Id-Nr: DE 256219491 - Steuer-Nr: 349 / 5723 / 2713
>>
>> *From:*step-manufacturing 
>> [mailto:step-manufacturing-bounces at steptools.com] *On Behalf Of 
>> *Martin Hardwick
>> *Sent:* Monday, March 26, 2018 1:59 PM
>> *To:* step-manufacturing at steptools.com
>> *Subject:* [step-manufacturing] Meeting agenda for Wednesday - 
>> proposed changes to the grand challenge
>>
>> All,
>>
>> The following agenda is proposed for the meeting at the _regular 
>> times_ on Wednesday (Europe and the USA have both moved to summer time).
>>
>> 1. MTConnect and QIF results of the DMG Mori demonstration (attached).
>> 2. Preparation schedule for the SC4 China meeting (attached).
>> 3. Proposed changes (below) to the ground rules for the Grand 
>> Challenge to give the vendor's more creative scope:
>>
>>   * The fishhead will be divided into four stages (feature
>>     preparation, interior roughing, exterior roughing, and finishing).
>>   * Everyone will use the same Sandvik tooling.
>>   * Each vendor will develop its own solutions (toolpaths) for each
>>     stage.
>>   * Each MTB will measure the results of machining its stage for
>>     conformance to the required tolerances.
>>   * The results of the measurement will be reported as MTConnect and
>>     evaluated as QIF.
>>   * We will set everything up at the start of each day and not move
>>     the parts between MTB's during the day because of the foot traffic.
>>
>> Martin Hardwick
>> Convener WG15 Digital Manufacturing
>>
>> 7:30AM Pacific, 10:30AM Eastern, 3:30PM UK, 4:30PM Europe
>> 1. Please join my meeting.
>> https://www2.gotomeeting.com/join/285940474
>>
>> 2. Use your microphone and speakers (VoIP) - a headset is 
>> recommended. Or, call in using your telephone.
>>
>> Australia: +61 2 6108 4655
>> Austria: +43 (0) 7 2088 1403
>> Belgium: +32 (0) 28 08 4294
>> Canada: +1 (416) 800-9295
>> Denmark: +45 (0) 69 91 88 65
>> Finland: +358 (0) 942 41 5781
>> France: +33 (0) 182 880 459
>> Germany: +49 (0) 811 8899 6901
>> Ireland: +353 (0) 14 845 979
>> Italy: +39 0 699 36 98 81
>> Netherlands: +31 (0) 208 080 382
>> New Zealand: +64 (0) 4 974 7214
>> Norway: +47 21 03 58 99
>> Spain: +34 931 81 6669
>> Sweden: +46 (0) 852 503 499
>> Switzerland: +41 (0) 435 0167 09
>> United Kingdom: +44 (0) 207 151 1857
>> United States: +1 (619) 550-0006
>>
>> Access Code: 285-940-474
>> Audio PIN: Shown after joining the meeting
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180328/ed670926/attachment.html>