[step-manufacturing] Reminder: conference call today

Wed Aug 9 15:06:02 EDT 2017

All,

I am very sorry about the broken link today.

I tried running the call from home but it seems that a previously 
reliable Internet provider is now blocking broadcasts by dropping 
connections.

I think there was a lot of interest in the topic so I am inclined to 
reschedule this call for the same time next week (one week earlier than 
normal).

If you are interested let me know if you think this would be a good or 
bad idea.

Martin

On 8/9/2017 11:12 AM, Christian Caillet wrote:
>
> same - so what I keep from this beginning of session (if I understood 
> well), is a discussion about QIF to be more closely bound with STEP 
> (Part 28 ? with EXPRESS schema and general resources of STEP or 
> keeping  separate schema ?)
>
> Another concern is about completion of AP242 E2
>
>
> Le 09/08/2017 à 17:00, Trainer, Asa a écrit :
>>
>> I lost the connection and have rejoined but Go2Mtg says “Meeting will 
>> begin when the organizer arrives”…
>>
>> Asa
>>
>> *From:*step-manufacturing 
>> [mailto:step-manufacturing-bounces at steptools.com] *On Behalf Of 
>> *Christian Caillet
>> *Sent:* Wednesday, August 09, 2017 10:53 AM
>> *To:* Martin Hardwick; step-manufacturing at steptools.com
>> *Subject:* Re: [step-manufacturing] Reminder: conference call today
>>
>> lost connection ?
>>
>> Le 09/08/2017 à 14:06, Martin Hardwick a écrit :
>>
>>
>>
>>     -------- Forwarded Message --------
>>
>>     *Subject: *
>>
>>     	
>>
>>     [step-manufacturing] Reminder and agenda - conference call this
>>     Wednesday
>>
>>     *Date: *
>>
>>     	
>>
>>     Mon, 7 Aug 2017 08:33:37 -0400
>>
>>     *From: *
>>
>>     	
>>
>>     Martin Hardwick <hardwick at steptools.com>
>>     <mailto:hardwick at steptools.com>
>>
>>     *To: *
>>
>>     	
>>
>>     step-manufacturing at steptools.com
>>     <mailto:step-manufacturing at steptools.com>
>>     <step-manufacturing at steptools.com>
>>     <mailto:step-manufacturing at steptools.com>
>>
>>     All,
>>
>>     The conference call is at the regular times this Wednesday. The
>>     proposed agenda is as follows:
>>
>>     1. Build Here, Build Now, Build Right challenge for IMTS 2018 and
>>     JIMTOF 2018 (see attachment).
>>
>>     2. Inclusion of QIF in the work scope of WG15 - a federated
>>     architecture for STEP-Manufacturing?
>>
>>       * STEP excels at product modeling which requires a large
>>         investment and needs stability to maintain the value of that
>>         investment.
>>       * MTConnect excels at process monitoring which requires real
>>         time, time-stamps and a data model that is easy to process.
>>       * QIF excels at reporting which requires a rich, flexible data
>>         model that can explain the reasons for a report.
>>
>>     The proposal is to use MTConnect as a "Part 28" for communicating
>>     model changes between STEP and QIF, and thereby enabling CNC
>>     machines to make real time corrections using reports from CMM
>>     machines.
>>
>>     3. Assistance for completion of AP242 Edition 2.
>>
>>     Martin Hardwick
>>     Convener WG15 Digital Manufacturing
>>
>>     7:30AM Pacific, 10:30AM Eastern, 3:30PM UK, 4:30PM Europe
>>     1. Please join my meeting.
>>     https://www2.gotomeeting.com/join/285940474
>>
>>     2. Use your microphone and speakers (VoIP) - a headset is
>>     recommended. Or, call in using your telephone.
>>
>>     Australia: +61 2 6108 4655
>>     Austria: +43 (0) 7 2088 1403
>>     Belgium: +32 (0) 28 08 4294
>>     Canada: +1 (416) 800-9295
>>     Denmark: +45 (0) 69 91 88 65
>>     Finland: +358 (0) 942 41 5781
>>     France: +33 (0) 182 880 459
>>     Germany: +49 (0) 811 8899 6901
>>     Ireland: +353 (0) 14 845 979
>>     Italy: +39 0 699 36 98 81
>>     Netherlands: +31 (0) 208 080 382
>>     New Zealand: +64 (0) 4 974 7214
>>     Norway: +47 21 03 58 99
>>     Spain: +34 931 81 6669
>>     Sweden: +46 (0) 852 503 499
>>     Switzerland: +41 (0) 435 0167 09
>>     United Kingdom: +44 (0) 207 151 1857
>>     United States: +1 (619) 550-0006
>>
>>     Access Code: 285-940-474
>>     Audio PIN: Shown after joining the meeting
>>
>>
>>
>>
>>     _______________________________________________
>>
>>     step-manufacturing mailing list
>>
>>     step-manufacturing at steptools.com
>>     <mailto:step-manufacturing at steptools.com>
>>
>>     http://lists.steptools.com/mailman/listinfo/step-manufacturing
>>
>> -- 
>>
>> Datakit <http://www.datakit.com>
>>
>> *Christian CAILLET*
>> Chef de Projet
>>
>> *DATAKIT*
>> 99, rue de Gerland
>> 69007 LYON - FRANCE
>>
>> *Tel*: +33 478 396 369
>> *Fax* : +33 426 299 867
>> www.datakit.com <http://www.datakit.com>
>>
>>
>>
>>
>> CONFIDENTIALITY NOTICE: This email message and any attachments to it, 
>> is intended only for the individual or entity to which it is 
>> addressed and may contain confidential material. If you are not the 
>> intended recipient, or the employee or agent responsible for 
>> delivering it to the intended recipient, please do not disclose, 
>> copy, forward, or retain. If you have received this in error, please 
>> contact the sender by reply email, erase the original message from 
>> your computer system, and destroy all copies of the original 
>> message.   Thank You.
>>
>
> -- 
>
> Datakit <http://www.datakit.com>
> *Christian CAILLET*
> Chef de Projet
> *DATAKIT*
> 99, rue de Gerland
> 69007 LYON - FRANCE
> *Tel* : +33 478 396 369
> *Fax* : +33 426 299 867
> www.datakit.com <http://www.datakit.com>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20170809/ef98dd53/attachment.html>