[step-manufacturing] Reminder: conference call today

Wed Aug 9 16:04:17 EDT 2017

Hi Martin,
Yes, next week would be good, except the DMSC (ANSI QIF) has a recurring QIF Working Group meeting (9-10 Central) every other week on Wednesday.
We need folks like John and Curtis.  How to solve?
- Larry

From: step-manufacturing [mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin Hardwick
Sent: Wednesday, August 09, 2017 2:06 PM
To: Christian Caillet; Trainer, Asa; step-manufacturing at steptools.com
Subject: Re: [step-manufacturing] Reminder: conference call today

All,

I am very sorry about the broken link today.

I tried running the call from home but it seems that a previously reliable Internet provider is now blocking broadcasts by dropping connections.

I think there was a lot of interest in the topic so I am inclined to reschedule this call for the same time next week (one week earlier than normal).

If you are interested let me know if you think this would be a good or bad idea.

Martin

On 8/9/2017 11:12 AM, Christian Caillet wrote:

same - so what I keep from this beginning of session (if I understood well), is a discussion about QIF to be more closely bound with STEP (Part 28 ? with EXPRESS schema and general resources of STEP or keeping  separate schema ?)

Another concern is about completion of AP242 E2

Le 09/08/2017 à 17:00, Trainer, Asa a écrit :
I lost the connection and have rejoined but Go2Mtg says “Meeting will begin when the organizer arrives”…

Asa

From: step-manufacturing [mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Christian Caillet
Sent: Wednesday, August 09, 2017 10:53 AM
To: Martin Hardwick; step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com>
Subject: Re: [step-manufacturing] Reminder: conference call today

lost connection ?

Le 09/08/2017 à 14:06, Martin Hardwick a écrit :

-------- Forwarded Message --------
Subject:

[step-manufacturing] Reminder and agenda - conference call this Wednesday

Date:

Mon, 7 Aug 2017 08:33:37 -0400

From:

Martin Hardwick <hardwick at steptools.com><mailto:hardwick at steptools.com>

To:

step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com><mailto:step-manufacturing at steptools.com>

All,

The conference call is at the regular times this Wednesday. The proposed agenda is as follows:
1. Build Here, Build Now, Build Right challenge for IMTS 2018 and JIMTOF 2018 (see attachment).

2. Inclusion of QIF in the work scope of WG15 - a federated architecture for STEP-Manufacturing?

  *   STEP excels at product modeling which requires a large investment and needs stability to maintain the value of that investment.
  *   MTConnect excels at process monitoring which requires real time, time-stamps and a data model that is easy to process.
  *   QIF excels at reporting which requires a rich, flexible data model that can explain the reasons for a report.
The proposal is to use MTConnect as a "Part 28" for communicating model changes between STEP and QIF, and thereby enabling CNC machines to make real time corrections using reports from CMM machines.

3. Assistance for completion of AP242 Edition 2.

Martin Hardwick
Convener WG15 Digital Manufacturing

7:30AM Pacific, 10:30AM Eastern, 3:30PM UK, 4:30PM Europe
1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting

_______________________________________________

step-manufacturing mailing list

step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com>

http://lists.steptools.com/mailman/listinfo/step-manufacturing

--

Christian CAILLET
Chef de Projet <http://www.datakit.com>
DATAKIT
99, rue de Gerland
69007 LYON - FRANCE <http://www.datakit.com>
Tel : +33 478 396 369
Fax : +33 426 299 867
www.datakit.com <http://www.datakit.com>
 <http://www.datakit.com>

<http://www.datakit.com>
CONFIDENTIALITY NOTICE: This email message and any attachments to it, is intended only for the individual or entity to which it is addressed and may contain confidential material. If you are not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, please do not disclose, copy, forward, or retain. If you have received this in error, please contact the sender by reply email, erase the original message from your computer system, and destroy all copies of the original message.   Thank You.<http://www.datakit.com>
-- <http://www.datakit.com>
[Datakit]<http://www.datakit.com/>
Christian CAILLET
Chef de Projet <http://www.datakit.com>
DATAKIT
99, rue de Gerland
69007 LYON - FRANCE <http://www.datakit.com>
Tel : +33 478 396 369
Fax : +33 426 299 867
www.datakit.com <http://www.datakit.com>

**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

Scanned by the Clearswift SECURE Email Gateway for computer viruses.

www.clearswift.com
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20170809/524c9ee0/attachment.html>