[step-manufacturing] Coordinates for conference call this Wednesday

[Martin Hardwick]

All,

The call in information is below. Many thanks to Sandvik for 
continuing to provide the Web site. There is an image of the new 
Moldy part as machined by Boeing at:

ftp://ftp.steptools.com/private/Bath/PICT0015_edited-1.jpg

Martin

++++++++++++++++++++++

The bi-weekly conference call is this Wednesday August 12th at 4:30PM 
France, 10:30AM Eastern and 7:30AM Western .. See below for 
connection information.

1.  Please join my meeting.
<https://www1.gotomeeting.com/join/791419392>https://www1.gotomeeting.com/join/791419392

2.  Use your microphone and speakers (VoIP) - a headset is 
recommended.  Or, call in using your telephone.

Australia: +61 (0) 7 3123 6030
Austria: +43 (0) 437 2088 1407
Switzerland: +41 (0) 225 3314 55
Germany: +49 (0) 892 2061 169
France: +33 (0) 182 880 463
United Kingdom: +44 (0) 203 318 4725
Italy: +39 (0) 553 98 95 69
New Zealand: +64 (0) 4 974 7216
Sweden: +46 (0) 313 613 559
United States: 626-521-0010
Access Code: 791-419-392
Audio PIN: Shown after joining the meeting

Meeting ID: 791-419-392


>Date: Mon, 10 Aug 2009 18:10:41 -0400
>To: step-manufacturing at steptools.com
>From: Martin Hardwick <hardwick at steptools.com>
>Subject: STEP-NC Conference Call this Wednesday
>
>
>All,
>
>The next conference call will be this Wednesday.  The coordinates of 
>the GoTo meeting will be sent in another message. The agenda is as follows:
>
>1. Review meeting logistics and agenda
>
>ftp://ftp.steptools.com/private/Bath/Draft_T24_Bath_Agenda.pdf
>
>2. Review progress on the Boxy part
>
>ftp://ftp.steptools.com/private/Bath/Boxy_Part_All_Operations.238
>
>3. Review progress on the Moldy part
>
>ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238
>
>V7.16 of the STEP-NC Explorer includes support for AP-238 files with 
>multiple setups and can manage the two setup's defined for the Boxy 
>part. The Explorer also has a feed-speed editor for use with the Moldy part.
>
>A download for a read-only version of the Explorer is at:
>
>http://www.steptools.com/products/stepncmachine/download/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20090811/72ce7fa5/attachment.htm>