<html>
<body>
<br>
All,<br><br>
The call in information is below. Many thanks to Sandvik for continuing
to provide the Web site. There is an image of the new Moldy part as
machined by Boeing at:<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/PICT0015_edited-1.jpg" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/PICT0015_edited-1.jpg</a><br><br>
Martin<br><br>
++++++++++++++++++++++<br><br>
The bi-weekly conference call is this Wednesday August 12th at 4:30PM
France, 10:30AM Eastern and 7:30AM Western .. See below for connection
information. <br><br>
1. Please join my meeting.<br>
<font color="#0000FF">
<a href="https://www1.gotomeeting.com/join/791419392">
https://www1.gotomeeting.com/join/791419392<br><br>
</a></font>2. Use your microphone and speakers (VoIP) - a headset
is recommended. Or, call in using your telephone.<br><br>
Australia: +61 (0) 7 3123 6030<br>
Austria: +43 (0) 437 2088 1407<br>
Switzerland: +41 (0) 225 3314 55<br>
Germany: +49 (0) 892 2061 169<br>
France: +33 (0) 182 880 463<br>
United Kingdom: +44 (0) 203 318 4725<br>
Italy: +39 (0) 553 98 95 69<br>
New Zealand: +64 (0) 4 974 7216<br>
Sweden: +46 (0) 313 613 559<br>
United States: 626-521-0010<br>
Access Code: 791-419-392<br>
Audio PIN: Shown after joining the meeting<br><br>
Meeting ID: 791-419-392 <br><br>
<br>
<blockquote type=cite class=cite cite="">Date: Mon, 10 Aug 2009 18:10:41
-0400<br>
To: step-manufacturing@steptools.com<br>
From: Martin Hardwick <hardwick@steptools.com><br>
Subject: STEP-NC Conference Call this Wednesday<br><br>
<br>
All,<br><br>
The next conference call will be this Wednesday. The coordinates of
the GoTo meeting will be sent in another message. The agenda is as
follows:<br><br>
1. Review meeting logistics and agenda<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Draft_T24_Bath_Agenda.pdf" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Draft_T24_Bath_Agenda.pdf</a><br><br>
2. Review progress on the Boxy part<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_All_Operations.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_All_Operations.238</a><br>
<br>
3. Review progress on the Moldy part<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238</a>
<br><br>
V7.16 of the STEP-NC Explorer includes support for AP-238 files with
multiple setups and can manage the two setup's defined for the Boxy part.
The Explorer also has a feed-speed editor for use with the Moldy
part.<br><br>
A download for a read-only version of the Explorer is at:<br><br>
<a href="http://www.steptools.com/products/stepncmachine/download/" eudora="autourl">
http://www.steptools.com/products/stepncmachine/download/</a></blockquote>
</body>
</html>