[step-manufacturing] New numbers for telcon on Wednesday

[Martin Hardwick]

All,

The conference call is tomorrow  (Wednesday 
September 17). PLEASE note that the telephone connection numbers have CHANGED.

Agenda:
1. Current status of preparation for demonstration
2. Schedule for the meeting (see new DRAFT below).

The call will be at the regular time 4:30PM 
France, 10:30AM Eastern USA, 7:30AM Western USA.

Audio hosted by SANDVIK:
   -Dial one of the listed local numbers to join the meeting
       USA 1 866 488 7956
       Sweden: +46 (0) 8 5051 3879 or 0200 896 296
       Germany: +49 (0) 69 71044 5442 or 0800 101 2144
       UK: +44 (0)20 7153 9922 or 0800 358 4906
       France : +33 (0)1 70 99 43 46 or 0800 941 582
      Japan: 0044 2213 2777
       (additional local numbers: 
<https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf>https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf) 


GoToMeeting scheduled for next conference call:

Wednesday, September 17 at 4:30 PM Västeuropa, normaltid at
  https://www2.gotomeeting.com/join/479709098
Meeting ID: 479-709-098

+++++ New Draft agenda for discussion during telcon +++++

Day 1 - October 1st - Demonstration Day
---------------------------------------------------------

8AM             Welcome
                 Brian Kindilein, CCAT
                 Sid Venkatesh Boeing

8:30AM  Review of the Latest STEP-NC Developments
                 Martin Hardwick, STEP Tools

9:30AM  Feed Speed Optimization
                 Leon, Xu, Boeing

10:00AM Introduction to Rough Machining demonstration
                 Bengt Olsson, Sandvik

10:30AM Break while rough machining continues

11:00AM         Semi-Finish and Finish machining of first blade
                 Peter Klein, Concepts Nrec

11:30PM         Closed loop measurement of first blade using Faro ARM
                         Sid Venkatesh, Boeing

Noon            Generate new  toolpaths
                 Peter Klein, Concepts NREC

12:30PM         Lunch

01:30PM         Semi-Finish and Finish machining of second blade
                         David Odendahl, Boeing

02:00PM Closed loop measurement of second blade using Faro ARM
                 Sid Venkatesh, Boeing

02:30PM         Final inspection using scanning probe
                 Larry Maggiano, Mitutoyo

03:30PM Break

04:00PM Panel discussion
                 Top 10 value adds in STEP-NC for manufacturing


Day 2 - October 2nd - Technical Discussions
-----------------------------------------------------------------

08:00AM Review of the Technical Corrigendum
                 David Loffredo, STEP Tools, Inc.

09:00AM Discussion of open issues
                 desirable extensions
                 new work items

10:00AM Break

10:30AM Interfacing ISO 13399 and STEP-NC
                 Bengt Olsson, Sandvik

12:00PM Lunch

01:00PM Machine tool modeling and simulation issues
                 Machine tool model
                 Performance and fidelity

02:00PM Measurement issues
                 Curve probing
                 Datum setup
                 Tool wear compensation

03:00PM Break

03:30PM Plans for next meeting
                 Location, schedule, technical targets

04:00PM Close of meeting

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20080916/a154119e/attachment.htm>