<html>
<body>
<br>
All,<br><br>
The conference call is tomorrow (Wednesday September 17). PLEASE
note that the telephone connection numbers have CHANGED.<br><br>
Agenda:<br>
1. Current status of preparation for demonstration<br>
2. Schedule for the meeting (see new DRAFT below).<br><br>
The call will be at the regular time 4:30PM France, 10:30AM Eastern USA,
7:30AM Western USA.<br><br>
<tt><font face="Courier New, Courier" size=2>Audio hosted by
SANDVIK:</font></tt> <br>
<tt><font face="Courier New, Courier" size=2> -Dial one of the
listed local numbers to join the meeting</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
USA 1 866 488 7956</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
Sweden: +46 (0) 8 5051 3879 or 0200 896
296</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
Germany: +49 (0) 69 71044 5442 or 0800 101
2144</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
UK: +44 (0)20 7153 9922 or 0800 358
4906</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
France : +33 (0)1 70 99 43 46 or 0800 941
582</font></tt> <br>
<tt><font face="Courier New, Courier" size=2> Japan:
0044 2213 2777</font></tt> <br>
<tt><font face="Courier New, Courier" size=2>
(additional local
numbers:</font></tt><font size=2>
</font>
<a href="https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf">
<font size=2 color="#0000FF">
https://filestore.xmr3.com/272575/12949241/shared/GlobalMeetingInformation.pdf</a>
</font><font size=2>)</font> <br><br>
GoToMeeting scheduled for next conference call:<br><br>
Wednesday, September 17 at 4:30 PM Västeuropa, normaltid at<br>
<a href="https://www2.gotomeeting.com/join/479709098" eudora="autourl">
https://www2.gotomeeting.com/join/479709098<br>
</a>Meeting ID: 479-709-098<br><br>
+++++ New Draft agenda for discussion during telcon +++++<br><br>
Day 1 - October 1st - Demonstration Day<br>
---------------------------------------------------------<br><br>
8AM
<x-tab> </x-tab><x-tab>
</x-tab>Welcome<br>
<x-tab> </x-tab><x-tab>
</x-tab>Brian Kindilein,
CCAT<br>
<x-tab> </x-tab><x-tab>
</x-tab>Sid Venkatesh
Boeing<br><br>
8:30AM<x-tab> </x-tab>Review of the Latest STEP-NC
Developments<br>
<x-tab> </x-tab><x-tab>
</x-tab>Martin Hardwick,
STEP Tools<br><br>
9:30AM<x-tab> </x-tab>Feed Speed Optimization<br>
<x-tab> </x-tab><x-tab>
</x-tab>Leon, Xu,
Boeing<br><br>
10:00AM<x-tab> </x-tab>Introduction to Rough Machining
demonstration<br>
<x-tab> </x-tab><x-tab>
</x-tab>Bengt Olsson,
Sandvik<br><br>
10:30AM<x-tab> </x-tab>Break while rough machining
continues<br><br>
11:00AM
<x-tab> </x-tab>
Semi-Finish and Finish machining of first blade<br>
<x-tab> </x-tab>Peter Klein, Concepts Nrec <br><br>
11:30PM
<x-tab> </x-tab>Closed
loop measurement of first blade using Faro ARM <br>
<x-tab> </x-tab>Sid
Venkatesh, Boeing <br><br>
Noon<x-tab> </x-tab><x-tab>
</x-tab>Generate
new toolpaths<br>
<x-tab> </x-tab><x-tab>
</x-tab>Peter Klein,
Concepts NREC<br><br>
12:30PM
<x-tab> </x-tab>Lunch<br>
<br>
01:30PM
<x-tab> </x-tab>
Semi-Finish and Finish machining of second blade <br>
<x-tab> </x-tab>David
Odendahl, Boeing <br><br>
02:00PM<x-tab> </x-tab>Closed loop measurement of second blade using
Faro ARM<br>
<x-tab> </x-tab><x-tab>
</x-tab>Sid Venkatesh,
Boeing<br><br>
02:30PM
<x-tab> </x-tab>Final
inspection using scanning probe<br>
<x-tab> </x-tab><x-tab>
</x-tab>Larry Maggiano,
Mitutoyo<br><br>
03:30PM<x-tab> </x-tab>Break<br><br>
04:00PM<x-tab> </x-tab>Panel discussion<br>
<x-tab> </x-tab><x-tab>
</x-tab>Top 10 value adds
in STEP-NC for manufacturing<br><br>
<br>
Day 2 - October 2nd - Technical Discussions<br>
-----------------------------------------------------------------<br><br>
08:00AM<x-tab> </x-tab>Review of the Technical Corrigendum<br>
<x-tab> </x-tab><x-tab>
</x-tab>David Loffredo,
STEP Tools, Inc.<br><br>
09:00AM<x-tab> </x-tab>Discussion of open issues<br>
<x-tab> </x-tab><x-tab>
</x-tab>desirable
extensions<br>
<x-tab> </x-tab><x-tab>
</x-tab>new work
items<br>
<x-tab> </x-tab><x-tab>
</x-tab><br>
10:00AM<x-tab> </x-tab>Break<br><br>
10:30AM<x-tab> </x-tab>Interfacing ISO 13399 and STEP-NC<br>
<x-tab> </x-tab><x-tab>
</x-tab>Bengt Olsson,
Sandvik<br><br>
12:00PM<x-tab> </x-tab>Lunch<br><br>
01:00PM<x-tab> </x-tab>Machine tool modeling and simulation
issues<br>
<x-tab> </x-tab><x-tab>
</x-tab>Machine tool
model<br>
<x-tab> </x-tab><x-tab>
</x-tab>Performance and
fidelity<br><br>
02:00PM<x-tab> </x-tab>Measurement issues<br>
<x-tab> </x-tab><x-tab>
</x-tab>Curve
probing<br>
<x-tab> </x-tab><x-tab>
</x-tab>Datum setup<br>
<x-tab> </x-tab><x-tab>
</x-tab>Tool wear
compensation<br><br>
03:00PM<x-tab> </x-tab>Break<br><br>
03:30PM<x-tab> </x-tab>Plans for next meeting<br>
<x-tab> </x-tab><x-tab>
</x-tab>Location,
schedule, technical targets<br><br>
04:00PM<x-tab> </x-tab>Close of meeting<br><br>
</body>
</html>