[step-manufacturing] Agenda for Dallas meeting

[Martin Hardwick]

Hi Ian,

Thanks for reminding us about harmonizing with ISO 14649.

The measurement model for Edition 1 of AP-238 consists of the probing 
operations defined by ISO 14649 and the GD&T information defined by 
STEP. The proposal for Edition 2 is to add the inspection features 
defined by AP-219 and some measurement metric and evaluation 
information that is being defined for us by the DMIS community. The 
current proposal is for the probing operation model to continue to be 
harmonized with ISO 14649.

The plate and contour cutting model that we have developed is the 
result a pilot project funded by the US shipbuilding industry. In the 
pilot we performed plasma cutting and laser marking of steel parts 
with and without bevels. In Part 15 we found information for wood and 
stone cutting but not metal cutting.

The versions of Part 15 and Part 16 that we have are both more than 
five years old. SC4 will be very interested to see the edition 2 
versions when they are available. STEP has spent 10 years harmonizing 
its GD&T model to meet the requirements of many applications so SC4 
believes that SC1 should harmonize the new Part 16 with STEP.

We encourage SC1 members to come to our meeting in Dallas to learn 
more about out plans for Edition 2 and see a demonstration of the 
what can be done in Edition 1 using the harmonization of ISO 14649 
and STEP GD&T.

At Ibusuki we asked Dr. Sakamoto to report back to us in Dallas about 
the SC1 meeting in Frankfurt.


Martin Hardwick
Team Leader STEP-Manufacturing


At 02:05 AM 10/12/2007, you wrote:
>Dear Martin Hardwick,
>One thing that needs to be sorted out is the relationship between the
>proposed AP238 measurement model and the ISO 14649 draft Part 16.  How
>does SC4 intend to harmonise with SC1 on this topic?  Another question
>concerns the AP238 intentions on plate cutting and the contour cutting
>draft version, Part 15 of ISO 14649.  Both parts 15 and 16 are under
>review for edition 2 of ISO 14649.
>
>Best regards - Ian Stroud
>
>-----Original Message-----
>From: step-manufacturing-bounces at steptools.com
>[mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin
>Hardwick
>Sent: mercredi, 10. octobre 2007 23:40
>To: step-manufacturing at steptools.com
>Subject: [step-manufacturing] Agenda for Dallas meeting
>
>
>All,
>
>Here is the current agenda for the Dallas meeting. Let me know if you
>have any suggestions, corrections or additions. Early indications are
>that the meeting is going to be well attended. If you only want to
>attend just the Wednesday and Thursday sessions then you should
>contact the meeting registration people using the phone number shown
>at the bottom of the registration form given by the URL below to make
>a one or two day registration.
>
>http://www.tc184-sc4.org/SC4_Open/Meetings/Future_Meetings/Irving/SC4_Me
>eting_Registration_Form.pdf
>
>Martin Hardwick
>Team Leader
>
>++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>+++++++++++++++
>
>1. Monday Afternoon October 29th
>
>No meeting planned
>
>2. Tuesday October 30th
>
>Review of AP status
>AP-238 e2 model for Plate Cutting - Joint meeting with shipbuilding?
>
>3. Wednesday October 31st
>
>Review of HiPP model extension to AP-238 e2
>         - Measurement features
>         - Measurement planning
>         - Measurement operations
>         - Measurement results
>         - Measurement evaluation
>Review of ISO 14649 status and patent issues
>
>Demonstration of PLM for Manufacturing
>
>4. Thursday November 1st
>
>Manufacturing demonstration
>         - Discussion of machining procedures
>         - Discussion of data assembly and representation
>         - Discussion and evaluation of inspection results
>
>Machining model extensions for AP-238 e2
>         - helical toolpaths
>         - Cutter cross section for feed and speed optimization
>         - Adaptive Programming
>         - Other
>
>AP-238 e2 model for Traceability
>
>Planning for future meetings
>         - Goals for next manufacturing demonstration
>         - Goals for AP-238 edition 2
>         - Goals for next meeting
>
>_______________________________________________
>step-manufacturing mailing list
>step-manufacturing at steptools.com
>http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
>!DSPAM:14,470f0ecb165711222944467!