[step-manufacturing] Agenda for Dallas meeting

[Stroud Ian Anthony]

Dear Martin Hardwick,
One thing that needs to be sorted out is the relationship between the
proposed AP238 measurement model and the ISO 14649 draft Part 16.  How
does SC4 intend to harmonise with SC1 on this topic?  Another question
concerns the AP238 intentions on plate cutting and the contour cutting
draft version, Part 15 of ISO 14649.  Both parts 15 and 16 are under
review for edition 2 of ISO 14649.

Best regards - Ian Stroud

-----Original Message-----
From: step-manufacturing-bounces at steptools.com
[mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin
Hardwick
Sent: mercredi, 10. octobre 2007 23:40
To: step-manufacturing at steptools.com
Subject: [step-manufacturing] Agenda for Dallas meeting


All,

Here is the current agenda for the Dallas meeting. Let me know if you 
have any suggestions, corrections or additions. Early indications are 
that the meeting is going to be well attended. If you only want to 
attend just the Wednesday and Thursday sessions then you should 
contact the meeting registration people using the phone number shown 
at the bottom of the registration form given by the URL below to make 
a one or two day registration.

http://www.tc184-sc4.org/SC4_Open/Meetings/Future_Meetings/Irving/SC4_Me
eting_Registration_Form.pdf

Martin Hardwick
Team Leader

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++

1. Monday Afternoon October 29th

No meeting planned

2. Tuesday October 30th

Review of AP status		
AP-238 e2 model for Plate Cutting - Joint meeting with shipbuilding?

3. Wednesday October 31st		
	
Review of HiPP model extension to AP-238 e2
	- Measurement features
	- Measurement planning
	- Measurement operations
	- Measurement results
	- Measurement evaluation
Review of ISO 14649 status and patent issues

Demonstration of PLM for Manufacturing

4. Thursday November 1st

Manufacturing demonstration
	- Discussion of machining procedures
	- Discussion of data assembly and representation
	- Discussion and evaluation of inspection results

Machining model extensions for AP-238 e2
	- helical toolpaths
	- Cutter cross section for feed and speed optimization
	- Adaptive Programming
	- Other

AP-238 e2 model for Traceability

Planning for future meetings
	- Goals for next manufacturing demonstration
	- Goals for AP-238 edition 2
	- Goals for next meeting

_______________________________________________
step-manufacturing mailing list
step-manufacturing at steptools.com
http://lists.steptools.com/mailman/listinfo/step-manufacturing