[step-manufacturing] Re: Hershey Meeting Report for WG7

[Xun Xu]

Thanks for the information, Suk-Hwan.
This is an indispensable element for STEP-compliant interoperable
manufacturing. As I mentioned earlier, we are also working on a similar
data model. I look forward to some good discussions with you.

Regards
Xun


-- 
Xun Xu (PhD)
Associate Professor
Department of Mechanical Engineering
School of Engineering, University of Auckland
Private Bag 92019, Auckland Mail Centre
Auckland 1142, New Zealand
Tel: ++64 9 373 7599 ext. 84527, Fax: 64 9 373 7479
http://www.engineers.auckland.ac.nz/~xxu008/


Suk-Hwan Suh wrote:
> Dear Mr. Wesche, Secretary of ISO TC184/SC1:
>  
> According to Hershey Resoultion shown below, as the Converner of ISO 
> TC184/SC1/WG7, I am submitting NWIP for Machine Tool Data Model, titled 
> "Machine tool data model for general manuafcturing 
> processes," (tentatively) formalized as Part 110 of ISO 14649.
>  
> The data model will be one of the key agenda to be discussed in the ISO 
> TC184/SC1/WG7 Meeting, and the Joint Meeting between ISO TC184/SC1/SG7 
> and ISO TC184/SC4/WG3/T24 to be held in Funchal on March 27 (Tuesday) 
> and 29 (Thursday), respectively.
>  
> I would like you proceed the due process for the NWIP.
>  
> Best regards 
>  
>  
> Suk-Hwan SUH, Convener of ISO TC184/SC1/WG7
> -- 
> Professor of School of Mechanical & Industrial Engg
> Director of Center for Ubiquitous Manufacturing
> Director of National Research Lab for STEP-NC/e-mfg
> POSTECH, Pohang, Korea 790-784
> Office: +82-54-279-2196, Mobile: +82-17-530-2196
> Fax: +82-54-279-5249, e-mail: shs at postech.ac.kr
>  
> 
> ------------------------------------------------------------------------
> *From:* Suk-Hwan Suh [mailto:shs at postech.ac.kr]
> *Sent:* Thursday, November 09, 2006 12:18 AM
> *To:* wesche; vitr; vankhai.nguyen at etat.ge.ch; Suk-Hwan SUH; Sakamoto 
> Chiaki; Rossi; Patrick(CETIM-FR); olivier(AFNOR); ian.stroud at epfl.ch; 
> hermetet filez christine, hfc; HENTZ Jean-Bernard; Hascoet; 
> Glantschnig-MSN; Glantschnig1; 박재훈
> *Cc:* hardwick at steptools.com; Newman; Xun Xu; zhanjf at cnis.gov.cn; 
> Zhigeng Pan; Y.Yusof; Wosnik; Tuokko; Tohru Mizuno; Takeshi Kishinami; 
> step-manufacturing at steptools.com; Sid; Sebastian; 
> peter.klemm at isw.uni-stuttgart.de; olof.nyqvist at iip.kth.se; 
> odendahl at boeing.com; Mr.Nordstrom(13399); Li Xiao Dong; kim(KOMMA); Juha 
> Saaski; hermetet filez christine, hfc; Gao, James; donmez; 
> dimitris.kiritsis at epfl.ch; crzhang at sdu.edu.cn; Bjorn Moseng; 박희철; 노 
> 태성(윈젠); knapp; Riliang Liu
> *Subject:* Hershey Meeting Report for WG7
> 
> Dear ISO TC184/SC1/WG7 Members and Interest Group:
>  
> In Hershey USA, we had a Joint Meeting with ISO TC184/SC4/WG3/T24, and 
> ISO TC184/SC1 Plenary Meeting on October 26 and 27, respectively.
>  
> We had many fruitful results in the Meetings, including:
>  
> 
>    1. Collaboration protocol between WG7 and T24
>    2. Collaboration with ISO TC39/SC2
>    3. NWIP for Machine Tool Data Model, "small" model to be formalized
>       as ISO 14649 Part 110.
>    4. Task force for 2nd Ed of ISO 14649
>    5. EDM data model Part 13 and 14 of ISO 14649
>    6. Milling Cutting data Model, currently FDIS version of Part 111 of
>       ISO 14649
>    7. Rapid Prototyping Model to be fomalized as ISO Part 17
>    8. Next Joint Meeting between WG7 and T24 at Funchal, March 2007
>    9.
>       FAMOUS Project
> 
>  
> For the deatils, see attached "Resolution of 15th SC1 Meeting." 
>  
>  
> Best regards
>  
>  
> Suk-Hwan SUH, Convener of ISO TC184/SC1/WG7
> ---
> Professor of Mechanical & Industrial Engineering
> Director of National Research Lab for STEP-NC/e-Mfg
> Director of Center for Ubiquitous Manufacturing
> POSTECH, Pohang, Korea 790-784
> Office: +82-54-279-2196, Mobile: +82-17-530-2196
> Fax: +82-54-279-5249, e-mail: shs at postech.ac.kr <mailto:shs at postech.ac.kr>