SEDS for ISO 10303-11

[Phil Spiby]

Looking at this briefly I would agree with the analysis and the
recommendation. I would also suggest that this be included into the DAM as a
minor correction (I see no point issuing the DAM, closely followed by
another TC!)

Phil

> -----Original Message-----
> From: owner-wg11 at steptools.com [mailto:owner-wg11 at steptools.com]On
> Behalf Of Jochen Haenisch
> Sent: Friday, November 02, 2001 12:11 PM
> To: 'wg11 at steptools.com'
> Subject: FW: SEDS for ISO 10303-11
>
>
> FYI
>
> ____________________________________________________________
> Jochen Haenisch			E-mail:
> Jochen.Haenisch at epmtech.jotne.com
> EPM Technology AS		Home of the EXPRESS Data Manager
> P.O Box 6629 Etterstad		Tel: Int + 47 23 17 17 26
> N-0607 Oslo				Fax: Int + 47 23 17 17 01
> Norway					Web:
> http://www.epmtech.jotne.com
>
> > -----Original Message-----
> > From:	Jochen Haenisch
> > Sent:	2. november 2001 13:04
> > To:	'seds at cme.nist.gov'
> > Cc:	Lorentz Buan; wg11 at smiling.net; 'Teresa Brittingham (SC4)'
> > Subject:	SEDS for ISO 10303-11
> >
> > Please, consider the SEDS report that is included below.
> > Best regards, Jochen Haenisch.
> >
> >  <<SEDS_Express_20011102.txt>>
> > ____________________________________________________________
> > Jochen Haenisch			E-mail:
> > Jochen.Haenisch at epmtech.jotne.com
> > EPM Technology AS		Home of the EXPRESS Data Manager
> > P.O Box 6629 Etterstad		Tel: Int + 47 23 17 17 26
> > N-0607 Oslo				Fax: Int + 47 23 17 17 01
> > Norway					Web:
> > http://www.epmtech.jotne.com
> >
>