[step-manufacturing] Notes from second CAM data exchange meeting

[Martin Hardwick]

We discussed how to exchange machining data that can be adapted for the 
machining conditions of a user.

Basic formulas are available here:

https://www.sandvik.coromant.com/en-us/knowledge/machining-formulas-definitions/milling-formulas-definitions

Such formulas can be included in a standard, but they will be less rich 
than the ones already available in the web sites of the cutting tool 
vendors.

However, if a solution must be adjusted because, for example, a 
temporary fixture is too weak for the maximum cutting forces, then the 
method for making changes must be defined.

The attached slide illustrates how permitted changes can be specified 
using an operation window.

-- 
Martin Hardwick
President STEP Tools, Inc.
Cell: 518 253-0596
"There are billions of STEP files and millions of STEP-NC files"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20221204/75e8034f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: AP238 Edition 4 ? Cutting recommendations 2022-11-30.pdf
Type: application/pdf
Size: 261769 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20221204/75e8034f/attachment.pdf>