[step-manufacturing] Reminder: conference call today
Martin Hardwick
hardwick at steptools.com
Wed Aug 9 16:49:38 EDT 2017
All,
So Wednesday next week is not reasonable because of a direct conflict
for many of those most interested in the issues we wish to discuss.
I think it would be good if we can meet before the DMSC, so I suggest we
have our call at 10:30AM on Monday (August 14).
Will this work?
Martin
On 8/9/2017 4:04 PM, Larry Maggiano wrote:
>
> Hi Martin,
>
> Yes, next week would be good, except the DMSC (ANSI QIF) has a
> recurring QIF Working Group meeting (9-10 Central) every other week on
> Wednesday.
>
> We need folks like John and Curtis. How to solve?
>
> - Larry
>
> *From:*step-manufacturing
> [mailto:step-manufacturing-bounces at steptools.com] *On Behalf Of
> *Martin Hardwick
> *Sent:* Wednesday, August 09, 2017 2:06 PM
> *To:* Christian Caillet; Trainer, Asa; step-manufacturing at steptools.com
> *Subject:* Re: [step-manufacturing] Reminder: conference call today
>
> All,
>
> I am very sorry about the broken link today.
>
> I tried running the call from home but it seems that a previously
> reliable Internet provider is now blocking broadcasts by dropping
> connections.
>
> I think there was a lot of interest in the topic so I am inclined to
> reschedule this call for the same time next week (one week earlier
> than normal).
>
> If you are interested let me know if you think this would be a good or
> bad idea.
>
> Martin
>
> On 8/9/2017 11:12 AM, Christian Caillet wrote:
>
> same - so what I keep from this beginning of session (if I
> understood well), is a discussion about QIF to be more closely
> bound with STEP (Part 28 ? with EXPRESS schema and general
> resources of STEP or keeping separate schema ?)
>
> Another concern is about completion of AP242 E2
>
> Le 09/08/2017 à 17:00, Trainer, Asa a écrit :
>
> I lost the connection and have rejoined but Go2Mtg says
> “Meeting will begin when the organizer arrives”…
>
> Asa
>
> *From:* step-manufacturing
> [mailto:step-manufacturing-bounces at steptools.com] *On Behalf
> Of *Christian Caillet
> *Sent:* Wednesday, August 09, 2017 10:53 AM
> *To:* Martin Hardwick; step-manufacturing at steptools.com
> <mailto:step-manufacturing at steptools.com>
> *Subject:* Re: [step-manufacturing] Reminder: conference call
> today
>
> lost connection ?
>
> Le 09/08/2017 à 14:06, Martin Hardwick a écrit :
>
>
>
> -------- Forwarded Message --------
>
> *Subject: *
>
>
>
> [step-manufacturing] Reminder and agenda - conference call
> this Wednesday
>
> *Date: *
>
>
>
> Mon, 7 Aug 2017 08:33:37 -0400
>
> *From: *
>
>
>
> Martin Hardwick <hardwick at steptools.com>
> <mailto:hardwick at steptools.com>
>
> *To: *
>
>
>
> step-manufacturing at steptools.com
> <mailto:step-manufacturing at steptools.com>
> <step-manufacturing at steptools.com>
> <mailto:step-manufacturing at steptools.com>
>
> All,
>
> The conference call is at the regular times this
> Wednesday. The proposed agenda is as follows:
>
> 1. Build Here, Build Now, Build Right challenge for IMTS
> 2018 and JIMTOF 2018 (see attachment).
>
> 2. Inclusion of QIF in the work scope of WG15 - a
> federated architecture for STEP-Manufacturing?
>
> * STEP excels at product modeling which requires a large
> investment and needs stability to maintain the value
> of that investment.
> * MTConnect excels at process monitoring which requires
> real time, time-stamps and a data model that is easy
> to process.
> * QIF excels at reporting which requires a rich,
> flexible data model that can explain the reasons for a
> report.
>
> The proposal is to use MTConnect as a "Part 28" for
> communicating model changes between STEP and QIF, and
> thereby enabling CNC machines to make real time
> corrections using reports from CMM machines.
>
> 3. Assistance for completion of AP242 Edition 2.
>
> Martin Hardwick
> Convener WG15 Digital Manufacturing
>
> 7:30AM Pacific, 10:30AM Eastern, 3:30PM UK, 4:30PM Europe
> 1. Please join my meeting.
> https://www2.gotomeeting.com/join/285940474
>
> 2. Use your microphone and speakers (VoIP) - a headset is
> recommended. Or, call in using your telephone.
>
> Australia: +61 2 6108 4655
> Austria: +43 (0) 7 2088 1403
> Belgium: +32 (0) 28 08 4294
> Canada: +1 (416) 800-9295
> Denmark: +45 (0) 69 91 88 65
> Finland: +358 (0) 942 41 5781
> France: +33 (0) 182 880 459
> Germany: +49 (0) 811 8899 6901
> Ireland: +353 (0) 14 845 979
> Italy: +39 0 699 36 98 81
> Netherlands: +31 (0) 208 080 382
> New Zealand: +64 (0) 4 974 7214
> Norway: +47 21 03 58 99
> Spain: +34 931 81 6669
> Sweden: +46 (0) 852 503 499
> Switzerland: +41 (0) 435 0167 09
> United Kingdom: +44 (0) 207 151 1857
> United States: +1 (619) 550-0006
>
> Access Code: 285-940-474
> Audio PIN: Shown after joining the meeting
>
>
>
> _______________________________________________
>
> step-manufacturing mailing list
>
> step-manufacturing at steptools.com
> <mailto:step-manufacturing at steptools.com>
>
> http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
> --
>
> *Christian CAILLET*
> Chef de Projet <http://www.datakit.com>
>
> *DATAKIT*
> 99, rue de Gerland
> 69007 LYON - FRANCE <http://www.datakit.com>
>
> *Tel*: +33 478 396 369
> *Fax* : +33 426 299 867
> _www.datakit.com_ <http://www.datakit.com>
>
> <http://www.datakit.com>
>
>
> <http://www.datakit.com>
>
> CONFIDENTIALITY NOTICE: This email message and any attachments
> to it, is intended only for the individual or entity to which
> it is addressed and may contain confidential material. If you
> are not the intended recipient, or the employee or agent
> responsible for delivering it to the intended recipient,
> please do not disclose, copy, forward, or retain. If you have
> received this in error, please contact the sender by reply
> email, erase the original message from your computer system,
> and destroy all copies of the original message. Thank You.
> <http://www.datakit.com>
>
> -- <http://www.datakit.com>
>
> Datakit <http://www.datakit.com/>
>
> *Christian CAILLET*
> Chef de Projet <http://www.datakit.com>
>
> *DATAKIT*
> 99, rue de Gerland
> 69007 LYON - FRANCE <http://www.datakit.com>
>
> *Tel*: +33 478 396 369
> *Fax* : +33 426 299 867
> _www.datakit.com_ <http://www.datakit.com>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> Scanned by the Clearswift SECURE Email Gateway for computer viruses.
>
> **********************************************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20170809/e309066e/attachment.html>
More information about the step-manufacturing
mailing list