[step-manufacturing] Slides for December 14 conference call (today)

[Martin Hardwick]

All,

Here are some slides on how we can use MTConnect, STEP and QIF to check 
on the results of an operation when the potential for a tool wear issue 
has been identified.

Martin

On 12/13/2016 10:13 AM, Horst, John A. (Fed) wrote:

> Hi Martin,
>
> The DMSC is in dialog with the MTConnect Institute to reference QIF 
> elements when doing in-process measurement. DMSC and MTConnect 
> leadership has been in dialog about this for some time. Is there any 
> talk about this in your group?  Can we talk about this Wednesday with 
> your group?
>
> Thanks,
>
> John Horst
>
> NIST
>
> *From:*step-manufacturing 
> [mailto:step-manufacturing-bounces at steptools.com] *On Behalf Of 
> *Martin Hardwick
> *Sent:* Monday, December 12, 2016 8:00 AM
> *To:* step-manufacturing at steptools.com
> *Subject:* [step-manufacturing] Proposed agenda for December 14 
> conference call
>
> All,
>
> The last conference call of 2016 is this Wednesday at the regular 
> times - 7AM Pacific, 10AM Eastern, 3PM UK and 4PM Europe. The contact 
> details are repeated below for those who do not use an electronic 
> calendar.
>
> The following agenda is proposed:
>
> 1. Live demonstration of virtualized machining for a Haas mini-mill 
> (to be held December 19).
> 2. Proposal for an MTConnect extension to include probing results (see 
> below).
> 3. Planning for the February demonstration.
>
> 2016-04-23T21:53:38.7964000Z|measure|features:"PNT276,PNT219" 
> id:"DIST19" characteristic:"3D DISTANCE" nominal:2.6416 
> measured:2.64159200514476 minus:0.254 plus:0.254 deviation:0
>
> 2016-04-23T21:53:41.2768000Z|measure|features:"PNT282,PNT277" 
> id:"DIST20" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000355 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:42.6184000Z|measure|features:"PNT281,PNT278" 
> id:"DIST21" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000355 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:43.4140000Z|measure|features:"PNT279,PNT280" 
> id:"DIST22" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000364 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:44.1472000Z|measure|features:"LIN11,LIN12" id:"PERP3" 
> characteristic:"PERPENDICULARITY" nominal:0 
> measured:2.80981460321072E-11 minus:0 plus:0.254 deviation:0
>
> 2016-04-23T21:53:45.0832000Z|measure|features:"PNT283,PNT223" 
> id:"DIST23" characteristic:"3D DISTANCE" nominal:3.048 
> measured:3.04799197854405 minus:0.254 plus:0.254 deviation:0
>
> 2016-04-23T21:53:47.4232000Z|measure|features:"PNT289,PNT284" 
> id:"DIST24" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000363 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:48.9208000Z|measure|features:"PNT288,PNT285" 
> id:"DIST25" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000363 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:49.9036000Z|measure|features:"PNT286,PNT287" 
> id:"DIST26" characteristic:"3D DISTANCE" nominal:3.4544 
> measured:3.45440000000363 minus:0.2286 plus:0.2286 deviation:0
>
> 2016-04-23T21:53:50.5744000Z|measure|features:"PNT284,PNT282" 
> id:"DIST41" characteristic:"3D DISTANCE" nominal:19.1262 
> measured:19.1261999999964 minus:0.1778 plus:0.1778 deviation:0
>
> 2016-04-23T21:53:51.1828000Z|measure|features:"PNT285,PNT281" 
> id:"DIST43" characteristic:"3D DISTANCE" nominal:19.1262 
> measured:19.1261999999964 minus:0.1778 plus:0.1778 deviation:0
>
> 2016-04-23T21:53:51.9004000Z|measure|features:"PNT286,PNT280" 
> id:"DIST45" characteristic:"3D DISTANCE" nominal:19.1262 
> measured:19.1261999999963 minus:0.1778 plus:0.1778 deviation:0
>
> 2016-04-23T21:53:52.7740000Z|measure|features:"PNT290,PNT227" 
> id:"DIST27" characteristic:"3D DISTANCE" nominal:2.6416 
> measured:2.6415920051448 minus:0.254 plus:0.254 deviation:0
>
>
>
> 2016-04-23T22:01:06.7972000Z|measure|features:"PLN1" id:"FLAT1" 
> characteristic:"FLATNESS" nominal:0 measured:0.49999999926914 minus:0 
> plus:0.01 deviation:0.48999999926914
>
>
>
> Martin Hardwick
> Convener ISO WG15 Digital Manufacturing
>
> 7AM Pacific, 10AM Eastern, 3PM UK, 4PM Europe
> 1. Please join my meeting.
> https://www2.gotomeeting.com/join/285940474
>
> 2. Use your microphone and speakers (VoIP) - a headset is recommended. 
> Or, call in using your telephone.
>
> Australia: +61 2 6108 4655
> Austria: +43 (0) 7 2088 1403
> Belgium: +32 (0) 28 08 4294
> Canada: +1 (416) 800-9295
> Denmark: +45 (0) 69 91 88 65
> Finland: +358 (0) 942 41 5781
> France: +33 (0) 182 880 459
> Germany: +49 (0) 811 8899 6901
> Ireland: +353 (0) 14 845 979
> Italy: +39 0 699 36 98 81
> Netherlands: +31 (0) 208 080 382
> New Zealand: +64 (0) 4 974 7214
> Norway: +47 21 03 58 99
> Spain: +34 931 81 6669
> Sweden: +46 (0) 852 503 499
> Switzerland: +41 (0) 435 0167 09
> United Kingdom: +44 (0) 207 151 1857
> United States: +1 (619) 550-0006
>
> Access Code: 285-940-474
> Audio PIN: Shown after joining the meeting
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20161214/247b2f69/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Demo2.pptx
Type: application/vnd.openxmlformats-officedocument.presentationml.presentation
Size: 544277 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20161214/247b2f69/attachment.pptx>