[step-manufacturing] Reminder: conference call today

[Martin Hardwick]

We have new process optimization files from Bengt and Leon

ftp://downloads.steptools.com/private/JWG15/Mukilteo/Machining_Process_Optimization_logic_20160802.pptx
ftp://downloads.steptools.com/private/JWG15/Mukilteo/HF_Chip1.cpp

-------- Forwarded Message --------
Subject: 	[step-manufacturing] Reminder and agenda conference call on 
Wednesday
Date: 	Mon, 8 Aug 2016 07:45:22 -0400
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>



All,

The conference call is this Wednesday at the regular times - 7AM 
Pacific, 10AM Eastern, 3PM UK and 4PM Europe. The contact details are 
repeated below for those of you who do not use an electronic calendar.

The proposed agenda is as follows:

1. Demonstration agenda for October 5th meeting (see below)
2. Tolerances for setup 1 and setup 2.

ftp://downloads.steptools.com/private/JWG15/Mukilteo/Boxy_Part_IPM_OP1_Setup_1_third_master_20160805.stp
ftp://downloads.steptools.com/private/JWG15/Mukilteo/Boxy_Part_IPM_OP2_Setup_1_third_master_20160805.stp
ftp://downloads.steptools.com/private/JWG15/Mukilteo/Boxy_Part_IPM_OP8_Setup_2_third_master_20160805.stp
ftp://downloads.steptools.com/private/JWG15/Mukilteo/Boxy_Part_IPM_OP10_Setup_2_third_master_20160805.stp

3. Demonstration of machining visualization with MTConnect

Martin Hardwick
TC184/Sc4/Ag1

*“Roadmap for deploying semantic GD&T in manufacturing” *

*October 5^th , Future of Flight Museum, Mukilteo, WA*

*Aft Room – 8:30AM, 10:30AM and 12:30PM*

1.Demonstration of the Smart Machining Advisor

a.Open up the web site – Sid and Martin discuss what is happening

b.Show it giving tool advice

c.Show it giving tolerance advice

2.Explain the technology in the Smart Machining Advisor

a.Show the MTConnect stream

b.Show the STEP data

c.Show the QIF data

3.Show some applications

a.Verification of setup

b.Detection of wrong tooling

c.Detection of bad process data

4.Show the services

a.PSU demonstrates / discusses NC Generation Service

b.Mitutoyo demonstrates / discusses the Measurement Service

c.Sandvik demonstrates / discusses the Tooling Optimization Service

5.Summarize the benefits

a.Prevention of errors

b.Acceleration of machining

c.Reduced tool wear

d.Remote operation

e.Integrated measurement



7AM Pacific, 10AM Eastern, 3PM UK, 4PM Europe
1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. 
Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160810/203cd183/attachment.html>