[step-manufacturing] Reminder: conference call today

Wed May 18 10:16:02 EDT 2016

Will,

Do you know when MTConnect version 1.4 will be released?

Best regards,

Thanh Huynh
Electrical Engineering Supervisor
Okuma America Corporation
thuynh at okuma.com<mailto:thuynh at okuma.com>
704-504-6198
704-564-5657 (cell)
http://www.okuma.com/americas

[Description: Description: cid:image002.jpg at 01CEC699.036E4FA0]

THIS COMMUNICATION IS INTENDED FOR THE SOLE USE OF THE PERSON TO WHOM IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, CONFIDENTIAL AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAW. ANY DISSEMINATION, DISTRIBUTION OR DUPLICATION OF THIS COMMUNICATION BY SOMEONE OTHER THAN THE INTENDED RECIPIENT IS STRICTLY PROHIBITED. IF YOUR RECEIPT OF THIS COMMUNICATION IS IN ERROR, PLEASE NOTIFY THE SENDER AND DELETE THIS COMMUNICATION.

From: step-manufacturing [mailto:step-manufacturing-bounces at steptools.com] On Behalf Of William Sobel
Sent: Wednesday, May 18, 2016 9:58 AM
To: Martin Hardwick
Cc: step-manufacturing at steptools.com
Subject: Re: [step-manufacturing] Reminder: conference call today

I'm at a conference today and will not be able to break away for the conference call.

To your point, we should target MTConnect version 1.4 since we have some relevant information that will be forthcoming. We are working on the parts and process components of the standard and we would like to use the various projects to verify the effectiveness of the new additions. MTConnect is backward compatible.

I would suggest we limit scope for the initial demos for O3. I don't think there is adequate time to extend scope at this point - just my feeling.

Best Regards,
Will Sobel

[cid:image002.png at 01D1B0EE.47218860]

On May 18, 2016, at 07:56, Martin Hardwick <hardwick at steptools.com<mailto:hardwick at steptools.com>> wrote:

All
We need to discuss:  Should we use MTConnect v1.4 or MTConnect v1.3
We should discuss: Integration of additive and subtractive machining (see slide below).
Martin

<fcccgbgcgfecedbk.png>

-------- Forwarded Message --------
Subject:

[step-manufacturing] Second Reminder: conference call this Wednesday

Date:

Wed, 4 May 2016 07:25:27 -0400

From:

Martin Hardwick <hardwick at steptools.com><mailto:hardwick at steptools.com>

Organization:

STEP Tools, Inc.

To:

step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com><mailto:step-manufacturing at steptools.com>

Here is a draft for our testing schedule:

May - dry run machining results
June - wet run machining results
July - bad condition machining results (worn tools)
August - bad condition machining results (incorrect setup)
September - preparation for demonstration (concurrent video and sound streams)
October - demonstration

-------- Forwarded Message --------
Subject:

[step-manufacturing] Reminder: conference call this Wednesday

Date:

Mon, 2 May 2016 08:58:20 -0400

From:

Martin Hardwick <hardwick at steptools.com><mailto:hardwick at steptools.com>

Organization:

STEP Tools, Inc.

To:

step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com><mailto:step-manufacturing at steptools.com>

All,

The conference call is this Wednesday at the regular times - 7AM Pacific, 10AM Eastern, 3PM UK and 4PM Europe. The contact details are repeated below for those of you who do not use an electronic calendar.

The proposed agenda is as follows:

1. Updates on the digital monitoring / validation service.
2. Updates on the measurement service.
3. Updates on the NC Generation service.
4. Updates on preparations for the face to face meeting on June 14 and 15, and the demonstration on October 5th.

Martin Hardwick
TC184/Sc4/Ag1

<Mail Attachment.png>

7AM Pacific, 10AM Eastern, 3PM UK, 4PM Europe
1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting

_______________________________________________
step-manufacturing mailing list
step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com>
http://lists.steptools.com/mailman/listinfo/step-manufacturing

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160518/d180120d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1775 bytes
Desc: image001.jpg
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160518/d180120d/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 17931 bytes
Desc: image002.png
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160518/d180120d/attachment.png>