[step-manufacturing] Reminder: conference call today

[William Sobel]

I’m at a conference today and will not be able to break away for the conference call. 

To your point, we should target MTConnect version 1.4 since we have some relevant information that will be forthcoming. We are working on the parts and process components of the standard and we would like to use the various projects to verify the effectiveness of the new additions. MTConnect is backward compatible. 

I would suggest we limit scope for the initial demos for O3. I don’t think there is adequate time to extend scope at this point – just my feeling.

Best Regards,
Will Sobel



> On May 18, 2016, at 07:56, Martin Hardwick <hardwick at steptools.com> wrote:
> 
> All
> 
> We need to discuss:  Should we use MTConnect v1.4 or MTConnect v1.3
> 
> We should discuss: Integration of additive and subtractive machining (see slide below).
> 
> Martin
> 
> 
> <fcccgbgcgfecedbk.png>
> 
> 
> -------- Forwarded Message --------
> Subject:	[step-manufacturing] Second Reminder: conference call this Wednesday
> Date:	Wed, 4 May 2016 07:25:27 -0400
> From:	Martin Hardwick <hardwick at steptools.com> <mailto:hardwick at steptools.com>
> Organization:	STEP Tools, Inc.
> To:	step-manufacturing at steptools.com <mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com> <mailto:step-manufacturing at steptools.com>
> 
> 
> Here is a draft for our testing schedule:
> 
> May - dry run machining results
> June - wet run machining results
> July - bad condition machining results (worn tools)
> August - bad condition machining results (incorrect setup)
> September - preparation for demonstration (concurrent video and sound streams)
> October - demonstration
> 
> 
> -------- Forwarded Message --------
> Subject:	[step-manufacturing] Reminder: conference call this Wednesday
> Date:	Mon, 2 May 2016 08:58:20 -0400
> From:	Martin Hardwick <hardwick at steptools.com> <mailto:hardwick at steptools.com>
> Organization:	STEP Tools, Inc.
> To:	step-manufacturing at steptools.com <mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com> <mailto:step-manufacturing at steptools.com>
> 
> All,
> 
> The conference call is this Wednesday at the regular times - 7AM Pacific, 10AM Eastern, 3PM UK and 4PM Europe. The contact details are repeated below for those of you who do not use an electronic calendar.
> 
> The proposed agenda is as follows:
> 
> 1. Updates on the digital monitoring / validation service.
> 2. Updates on the measurement service. 
> 3. Updates on the NC Generation service.
> 4. Updates on preparations for the face to face meeting on June 14 and 15, and the demonstration on October 5th.
> 
> Martin Hardwick
> TC184/Sc4/Ag1
> 
> <Mail Attachment.png>
> 
> 7AM Pacific, 10AM Eastern, 3PM UK, 4PM Europe
> 1. Please join my meeting.
> https://www2.gotomeeting.com/join/285940474 <https://www2.gotomeeting.com/join/285940474>
> 
> 2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.
> 
> Australia: +61 2 6108 4655
> Austria: +43 (0) 7 2088 1403
> Belgium: +32 (0) 28 08 4294
> Canada: +1 (416) 800-9295
> Denmark: +45 (0) 69 91 88 65
> Finland: +358 (0) 942 41 5781
> France: +33 (0) 182 880 459
> Germany: +49 (0) 811 8899 6901
> Ireland: +353 (0) 14 845 979
> Italy: +39 0 699 36 98 81
> Netherlands: +31 (0) 208 080 382
> New Zealand: +64 (0) 4 974 7214
> Norway: +47 21 03 58 99
> Spain: +34 931 81 6669
> Sweden: +46 (0) 852 503 499
> Switzerland: +41 (0) 435 0167 09
> United Kingdom: +44 (0) 207 151 1857
> United States: +1 (619) 550-0006
> 
> Access Code: 285-940-474
> Audio PIN: Shown after joining the meeting 
> 
> _______________________________________________
> step-manufacturing mailing list
> step-manufacturing at steptools.com
> http://lists.steptools.com/mailman/listinfo/step-manufacturing

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160518/0e8df97f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Powered By Signature.png
Type: image/png
Size: 17931 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160518/0e8df97f/attachment.png>