[step-manufacturing] Minutes of Conference call on November 18th

[Martin Hardwick]

Attendees
--------------
Martin Hardwick, STEP Tools, USA
David Loffredo, STEP Tools, USA
Bengt Olsson, Sandvik, Sweden
Mikael Hedlind, Scania, Sweden
Magnus Lundgren, KTH, Sweden
Torsten Kjellberg KTH, Sweden
Alain Brail, Airbus (retired), France
Christian Callet, Datakit, France
Ian Stroud, EPFL, Sweden
David Odendahl, Boeing, USA
Graham Hemingway, Vanderbilt, USA
Pierre Duchier, Airbus, USA
Larry Maggiano, Miututoyo, USA


We brainstormed some ideas for IMTS 2016. There was an MTConnect 
dashboard at IMTS 2014 and one idea is to add the Mind the Gap and O3 
tools to this dashboard.

It was observed that the tooling optimization given at IMTS 2014 
continues to have impact with the following publication just released:

http://content.yudu.com/web/y5b2/0A1wm9v/MESeptember2015/flash/resources/164.htm 


Lorincz, Jim (September 2015). "Optimize Process for Best Performance". 
Advanced Manufacturing: Aerospace and Defense Manufacturing 2015 (SME). 
page 119

We decided to continue the discussion in the next call.

A recording of this conference calls is on the web site at the address 
below:
ftp://downloads.steptools.com/private/JWG15/Cycle7/JWG_15_20151118.mp4

The next conference call is planned for Wednesday December 2nd.

Martin Hardwick
Team Leader ISO STEP-Manufacturing


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20151123/217f7e45/attachment.html>