[step-manufacturing] Reminder and slides: Conference call today Wed Dec 10

[Martin Hardwick]

All,

The conference call is at the regular times today.

The slides to be presented by Dan Finke of Penn State ARL are at the 
following URL.
ftp://www.steptools.com/private/CAM_exchange/Cycle_5/AVM_iFAB_NC_Generation.pptx

Martin


-------- Original Message --------
Subject: 	[step-manufacturing] Agenda for conference call this Wed Dec 10
Date: 	Mon, 08 Dec 2014 08:43:53 -0500
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>



All,

The conference call will be held this Wednesday December 10 at the 
regular times - 7AM Western USA, 10AM Eastern USA, 3PM UK, 4PM Europe.

The following is the proposed agenda

1. Review of first draft agenda for the Kickoff meeting (attached)
2. Review of the ARL/AVM technology that will be used to build the NC 
Generation Service
3. First demonstration of remote machining using MTConnect

Martin Hardwick
Team Leader ISO STEP-Manufacturing

1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. 
Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20141210/a14bbf9e/attachment.html>