[step-manufacturing] NX support letter: Conference call today

[Suk-Hwan Suh]

Dear all:

 

Even if I have been away from the STEP-NC work for the recent years, as the
previous Convener of ISO TC184/SC1/WG7, and owner of ISO 14649 Part 12, 121,
201 since 2000, I totally agree with Dr. Stroud's comments. 

Anyway, this message finds you are all well, including Prof. Hardwick. I
appreciate your continuously active efforts on STEP-NC

 

Wishing the best success of STEP-NC technology in the world

 

With my warmest regards

 

Suk-Hwan Suh

Professor and Founding Dean of Graduate School of Engineering Mastership
(GEM)

Director of Center for Ubiquitous Manufacturing Systems Engineering

President-Elect of Korean Society of Systems Engineering

POSTECH, Korea

 

From: step-manufacturing [mailto:step-manufacturing-bounces at steptools.com]
On Behalf Of Stroud Ian Anthony
Sent: Wednesday, October 22, 2014 11:06 PM
To: Martin Hardwick; step-manufacturing at steptools.com
Subject: Re: [step-manufacturing] NX support letter: Conference call today

 

Dear Martin and everybody,
Concerning your draft letter of support.  Although, of course, the primary
concern of your group is AP238, David Madeley should be made aware that
there are two incarnations of STEP-NC, ISO 14649 as well as ISO 10303 AP238.
STEP-NC is a term coined by Siemens themselves and was used first for ISO
14649, not AP238.  

Best regards,

Ian

  _____  

From: step-manufacturing [step-manufacturing-bounces at steptools.com] on
behalf of Martin Hardwick [hardwick at steptools.com]
Sent: 22 October 2014 13:50
To: step-manufacturing at steptools.com
Subject: [step-manufacturing] NX support letter: Conference call today


All,

We been asked for a letter of support by Siemens NX CAM. They are planning
to start a STEP-NC implementation project in 2015 and would greatly
appreciate a letter from us to help justify the expense. A draft is
attached.

Martin



-------- Original Message -------- 


Subject: 

[step-manufacturing] Conference call this Wednesday October 22


Date: 

Mon, 20 Oct 2014 07:59:45 -0400


From: 

Martin Hardwick  <mailto:hardwick at steptools.com> <hardwick at steptools.com>


Organization: 

STEP Tools, Inc.


To: 

step-manufacturing at steptools.com  <mailto:step-manufacturing at steptools.com>
<step-manufacturing at steptools.com>



All,

The conference call will be held this Wednesday October 22 at the regular
times - 7AM Western USA, 10AM Eastern USA, 3PM UK, 4PM Europe.

The following is the proposed agenda

1. Review of the white paper executive summary (attached)

2. Review of the STEP-NC projects at the University of Nantes
ftp://www.steptools.com/private/CAM_exchange/Cycle_5/STEP-NC_Nantes_2014.pdf

3. Progress report on CAM and CNC vendor implementation

Martin Hardwick
Team Leader ISO STEP-Manufacturing

1. Please join my meeting.
 <https://www2.gotomeeting.com/join/285940474>
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or,
call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20141023/fec0ecfe/attachment.html>