[step-manufacturing] Conference call this Wednesday regular times for all

[Martin Hardwick]

All,

Our next conference call is this Wednesday, April 16th. As per last week 
the different time zones are back in synchronization. The proposed 
agenda is as follows:

1. Results of latest machining tests at Boeing (see below)
2. Making a STEP-NC feedback loop using MTConnect
3. Other MTConnect applications for STEP-NC
4. Robot machining discussions continued

Martin Hardwick
Team Leader STEP-Manufacturing

+++++++++++++++++++++++++++++++
had success with a Sandvik program.  It was generally quiet and drama 
free.  The spindle load was very light, and none of the tools show 
significant wear.

Here is the time for each tool:

T23 -- 31min

T7 -- 5min

T23 -- 5min

T2 -- 5min

T3 -- 15min

T4 -- 5min

T3 -- 2min
++++++++++++++++++++++++++++++++++++

1. Please join my meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. 
Or, call in using your telephone.

Australia: +61 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 811 8899 6901
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 207 151 1857
United States: +1 (619) 550-0006

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20140414/e773ecb9/attachment.html>