[step-manufacturing] Minutes of March 20 conference call

Tue Mar 26 11:40:14 EDT 2013

Do I understand it correctly, that the raw piece should have the 
dimensions 85 x 85x 87.5 [mm].
/Bengt

Bengt Olsson
AB Sandvik Coromant, CPII
Office Phone: +46 26-266691

Martin Hardwick

From:   Martin Hardwick <hardwick at steptools.com>
To:     "step-manufacturing at steptools.com" 
<step-manufacturing at steptools.com>
Date:   26/03/2013 16:10
Subject:        [step-manufacturing] Minutes of March 20 conference call
Sent by:        step-manufacturing-bounces at steptools.com

Attendees
--------------
Martin Hardwick, STEP Tools, USA
David Loffredo, STEP Tools, USA
Mikael Hedlind, Scania, Sweden
Magnus Lundgren, KTH, Sweden
Vincent Marchini, Ameritech, USA
Fred Proctor, NIST, USA
Alain Brail Airbus (retired), France
Bengt Olsson, Sandvik, Sweden
Mikael Tedborg, Sandvik, Sweden
David Madeley, Siemens, UK
Tom Raun, ISCAR, USA
Tom Teter, Dassault Systemes, USA
David Odendahl, Boeing, USA
Sid Venkatesh, Boeing, USA
Leon Xu, Boeing, USA
Robert Erickson, Pratt and Whitney, USA

We decided on two goals for the face to face meeting:

1. Demonstrate machine portability for the three STEP-NC files made by 
the three CAM systems.
2. Determine a plan for reading the STEP-NC data back into the CAM 
systems.

In our discussions it became clear that we would not meet these goals 
for a meeting on April 8th and 9th. We discussed two alternate dates. 
May 6th and 7th is convenient for most of the team but unavailable at 
CCAM. June 24th and 25th is convenient for CCAM but a date this late may 
slow momentum.

We decided to machine the part using 7075-T73 Aluminum. We discussed the 
part dimensions and it was observed that a previous version of Boxy was 
much better documented in this respect. This version has now been posted 
on the web site:

http://www.steptools.com/camxc/Boxy_Part_4-Axis_Machining_2_Setups1.238 
(1.7M Zipped P28 XML)
http://www.steptools.com/camxc/Boxy_Part_4-Axis_Machining_2_Setups.stpnc 
(8M P21 text)

The next conference call will be at the regular times on Wednesday April 
3rd. The meeting will include a demonstration of STEP-NC export from NX.

A recording of this conference call is available at the following ftp 
site:

ftp://www.steptools.com/private/CAM_exchange/Cycle_1/stepmanuf_telecon_20130320.wmv

Martin Hardwick
Team Leader ISO STEP-Manufacturing

_______________________________________________
step-manufacturing mailing list
step-manufacturing at steptools.com
http://lists.steptools.com/mailman/listinfo/step-manufacturing

This e-mail is confidential and it is intended only for the addressees. Any review, dissemination, distribution, or copying of this message by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message from your system. The sender does not accept liability for any errors or omissions in the contents of this message which may arise as a result of the e-mail transmission. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20130326/37fffec3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 22863 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20130326/37fffec3/attachment.gif>