[step-manufacturing] CORRECTION: Conference call this Friday on composites

[Stroud Ian Anthony]

Dear Everyone,
I found the presentation from Rick Murrish very interesting and have attached a few personal comments.  I think that the data exchange aspects can be handled, but am a little concerned that the tools available may not be optimal.  I think it would be better to study the problems first to optimise the solutions before working on the data exchange aspects.

Is Rick Murrish's presentation available and public?  If so, I would like to circulate it to SC1 participants for discussion.

Best regards,

Ian Stroud


________________________________
From: step-manufacturing-bounces at steptools.com [step-manufacturing-bounces at steptools.com] on behalf of Martin Hardwick [hardwick at steptools.com]
Sent: 09 August 2011 23:08
To: step-manufacturing at steptools.com
Subject: [step-manufacturing] CORRECTION: Conference call this Friday on composites


All,

The coordinates of the conference call in my original message were wrong. Please use the URL below to connect. Thank you.

The bi-weekly conference call is this Friday July 29 at 4:30PM France, 10:30AM Eastern and 7:30AM Western . See below for connection information.

1. Please join the meeting.
https://www2.gotomeeting.com/join/285940474

2. Use your microphone and speakers (VoIP) - a headset is recommended. Or, call in using your telephone.

Australia: +61 (0) 2 6108 4655
Austria: +43 (0) 7 2088 1403
Belgium: +32 (0) 28 08 4294
Canada: +1 (416) 800-9295
Denmark: +45 (0) 69 91 88 65
Finland: +358 (0) 942 41 5781
France: +33 (0) 182 880 459
Germany: +49 (0) 898 7806 6468
Ireland: +353 (0) 14 845 979
Italy: +39 0 699 36 98 81
Netherlands: +31 (0) 208 080 382
New Zealand: +64 (0) 4 974 7214
Norway: +47 (0) 21 03 58 99
Spain: +34 931 81 6669
Sweden: +46 (0) 852 503 499
Switzerland: +41 (0) 435 0167 09
United Kingdom: +44 (0) 203 535 0610
United States: +1 (914) 339-0034

Access Code: 285-940-474
Audio PIN: Shown after joining the meeting
Meeting ID: 285-940-474


-------- Original Message --------
Subject:        [step-manufacturing] Conference call this Friday on composites
Date:   Tue, 09 Aug 2011 12:51:51 -0400
From:   Martin Hardwick <hardwick at steptools.com><mailto:hardwick at steptools.com>
Organization:   STEP Tools, Inc.
To:     step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com> <step-manufacturing at steptools.com><mailto:step-manufacturing at steptools.com>



All,

The conference call this week will feature  a discussion on
manufacturing control for composite tape laying machines. Today these
machines are "stuck in the 1950's" because each machine has its own
custom CAM system and there is no possibility to share data or programs
between machines.

Rick Murrish,  Boeing Associate Technical Fellow and Composite Design
focal point for Boeing will give us a background talk on Composite
design and data representation.  We can then begin a discussion on how
to make composites manufacturing more efficient using STEP-NC

Martin Hardwick
Team Leader ISO STEP-Manufacturing
Professor and Acting Head of Computer Science, RPI
President STEP Tools, Inc.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20110815/10d5cc58/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Comments on composite design and manufacturing.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 13852 bytes
Desc: Comments on composite design and manufacturing.docx
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20110815/10d5cc58/attachment.docx>