[step-manufacturing] Revised agenda for Conference Call this Friday

[Stroud Ian Anthony]

Dear Everyone,

Just please note that SC1/WG7 already has an initial model for the process and machine description which is to be developed as a standard.  Also, please note that my understanding is that the actual manufacturing control for additive manufacturing is more in the domain of SC1 than SC4 so I would like to clarify the aim of the SC4 work.



Best regards,



Ian Stroud





________________________________
From: step-manufacturing-bounces at steptools.com [step-manufacturing-bounces at steptools.com] on behalf of Mason, Howard (UK) [Howard.Mason at baesystems.com]
Sent: 02 June 2011 17:00
To: Martin Hardwick; step-manufacturing at steptools.com
Subject: Re: [step-manufacturing] Revised agenda for Conference Call this Friday

Just to note that ISO has just approved a new TC 261 on Additive manufacture

Howard Mason
Corporate Information Standards Manager, Office of the CIO
Tel: +44 1252 383129
Mob: +44 780 171 3340
Eml: howard.mason at baesystems.com<mailto:howard.mason at baesystems.com>
BAE Systems plc
Registered Office: 6 Carlton Gardens, London, SW1Y 5AD, UK
Registered in England & Wales No: 1470151


________________________________
From: step-manufacturing-bounces at steptools.com [mailto:step-manufacturing-bounces at steptools.com] On Behalf Of Martin Hardwick
Sent: 02 June 2011 15:25
To: step-manufacturing at steptools.com
Subject: [step-manufacturing] Revised agenda for Conference Call this Friday

                    *** WARNING ***

  This message has originated outside your organisation,
  either from an external partner or the Global Internet.
      Keep this in mind if you answer this message.

All,

Dave L has to be at a school event on Friday so we need to change the agenda. The simulation demonstration will be given in the next call and we will use the additional time in this call to further discuss additive manufacturing. We have a new STEP model from the University of Bath describing an open source additive manufacturing machine.

ftp://ftp.steptools.com/private/Undecided/general-assembly.stp
http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/mechanics/solid-models/cartesian-robot-m4/

1. Additive Manufacturing Machines and Processes
2. Report back from the ISO STEP meeting in Portland
3. Accuracy evaluation for science based machining

Martin Hardwick
Team Leader

The bi-weekly conference call is this Friday June 3 at 4:30PM France, 10:30AM Eastern and 7:30AM Western . See below for connection information.

1.  Please join the meeting:
https://www2.gotomeeting.com/join/228593842

2.  Use your microphone and speakers (VoIP) - a headset is recommended.  Or, call in using your telephone.

Australia: +61 (0) 2 9037 1944
Austria: +43 (0) 7 2088 0034
Belgium: +32 (0) 28 08 9321
Canada: +1 (647) 977-5956
Denmark: +45 (0) 69 91 80 05
Finland: +358 (0) 931 58 1746
France: +33 (0) 182 880 780
Germany: +49 (0) 892 2061 159
Ireland: +353 (0) 15 290 180
Italy: +39 0 699 26 68 58
Netherlands: +31 (0) 208 908 267
New Zealand: +64 (0) 9 442 7358
Norway: +47 (0) 21 54 32 44
Spain: +34 911 23 0850
Sweden: +46 (0) 852 500 612
Switzerland: +41 (0) 435 0006 96
United Kingdom: +44 (0) 203 535 0611
United States: +1 (773) 945-1031

Access Code: 228-593-842
Audio PIN: Shown after joining the meeting
Meeting ID: 228-593-842

********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20110604/5f8922c6/attachment.html>