[step-manufacturing] Reminder Conference Call for next demonstration tomorrow (Wednesday)

[Martin Hardwick]

All,

An additional item from Alain Brail from Airbus (retired) has been added 
to the archive for consideration on the call tomorrow (Wednesday) at the 
usual times (see below).
ftp://www.steptools.com/private/Renton/Discussion_about_closed_loop.doc

The proposed agenda is as follows:
1. Discussion of goals for the next meeting/demonstration
2. Discussion of closed loop information model
3. Changes made to the STEP-NC Explorer since the NIST meeting
4. Fixture issues (if there is time)

Martin Hardwick
Team Leader STEP-Manufacturing



-------- Original Message --------
Subject: 	[step-manufacturing] Conference Call to start planning for 
next demonstration
Date: 	Thu, 29 Jul 2010 10:26:59 -0400
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com <step-manufacturing at steptools.com>




All,

After some debate the next demonstration will focus on closed loop 
machining and take place at the Boeing Renton 737 plant on October 12 
and 13 with a rehearsal day on October 11.

A new ftp site has been constructed and the following has been added:

1. The demonstration proposal
ftp://www.steptools.com/private/Renton/Demo_Proposal.doc

2. The latest version of the closed loop information model
ftp://www.steptools.com/private/Renton/Closed_loop_model.txt

3. The latest version of Boxy with new tool data
ftp://www.steptools.com/private/Renton/Boxy_Part_3-Axis_Machining_7_Setups_NIST_new_tool_descriptions.238

In addition the Mastercam export dll has been updated to export the new 
tool data.
ftp://www.steptools.com/private/Mastercam_X4/ap238export.dll

The coordinates for the GoTo meeting are posted below. Please contact me 
if you have any questions or suggestions.

Martin Hardwick
Team Leader STEP-Manufacturing

The bi-weekly conference call is this Wednesday August 4 at 4:30PM 
France, 10:30AM Eastern and 7:30AM Western . See below for connection 
information.

1.  Please join my meeting,  "Wednesday, August 4 at 16:30 W. Europe 
Daylight Time".
https://www2.gotomeeting.com/join/329654874

2.  Use your microphone and speakers (VoIP) - a headset is recommended. 
  Or, call in using your telephone.

Australia: +61 (0) 2 8014 9480
Austria: +43 (0) 7 20881033
Belgium: +32 (0) 28 08 4342
Canada: +1 416 900 3440
Switzerland: +41 (0) 435 0167 65
Germany: +49 (0) 898 7806 6466
Denmark: +45 69 91 89 21
Spain: +34 911829890
Finland: +358 942 415 770
France: +33 (0) 182 880 159
United Kingdom: +44 (0) 1316080046
Ireland: +353 (0) 19 030 050
Italy: +39 0693387550
Netherlands: +31 (0) 208 080 208
Norway: +47 21 54 82 21
New Zealand: +64 (0) 9 925 0481
Sweden: +46 (0) 852 500 179
United States: 909-259-0011
Access Code: 329-654-874
Audio PIN: Shown after joining the meeting

Meeting ID: 329-654-874

!DSPAM:14,4c518fb1289231681617146!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20100803/35ed50e1/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Attached Message Part
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20100803/35ed50e1/attachment.ksh>