[step-manufacturing] Last minute additions to the ftp site

[Martin Hardwick]

1. The latest version of Boxy with half inch tooling added

ftp://ftp.steptools.com/private/NIST/Boxy_Part_3-Axis_Machining_12_Setups_v5.238

2. A video showing the part being simulated in Vericut

ftp://ftp.steptools.com/private/NIST/v5_VCUT_Fanuc_3axis.wmv

3. A first cut at the meeting invitation

ftp://ftp.steptools.com/private/NIST/Spring10MeetingInvitation.doc


-------- Original Message --------
Subject: 	[step-manufacturing] Conference Call Wednesday 1 hour earlier 
for Europe
Date: 	Mon, 15 Mar 2010 11:33:17 -0400
From: 	Martin Hardwick <hardwick at steptools.com>
Organization: 	STEP Tools, Inc.
To: 	step-manufacturing at steptools.com




All,

The regular conference call is this Wednesday but NOT at the regular 
times for those in EUROPE because the US has already switched to summer 
time so it will be at the regular time for the US and one hour earlier 
for those in Europe. The proposed agenda is as follows:

1. Current status of the new Boxy STEP-NC data set with 1/2 inch tooling.

ftp://ftp.steptools.com/private/NIST/Boxy_Part_3-Axis_Machining_12_Setups_v3.238

2. Review of HiPP model extensions to AP-238 for inspection planning and 
measurement.

ftp://ftp.steptools.com/private/NIST/HiPP_cover_letter.doc

3. Plans for AP-238 edition 2.

     What should be included?
         TC1 corrections and enhancements
         Machine tool model
         HiPP model

     Should we hold a workshop
         Date
         Location

4. Review Schedule

March 03    - Tool and material selection
March 17    - Verification of Boxy with 1/2 inch tooling
March 31    - Test run of feed/speed optimization algorithms
April 14      - Participants complete dry runs
April 28      - Participants machine in wax
May 12      - Test run of tool wear measurement algorithms
May 26      - First round of on machine testing
June 9        - Finalize program for the NIST meeting and demonstration

The bi-weekly conference call is this Wednesday March 17 at 3:30PM 
France, 10:30AM Eastern and 7:30AM Western ... See below for connection 
information.

1.  Please join the meeting:
https://www2.gotomeeting.com/join/944436426

2.  Use your microphone and speakers (VoIP) - a headset is recommended. 
  Or, call in using your telephone.

Australia: +61 (0) 3 9008 6827
Austria: +43 (0) 437 2088 1405
Belgium: +32 (0) 28 08 4295
Canada: +1 647 724 3553
Switzerland: +41 (0) 225 3314 53
Germany: +49 (0) 898 7806 6469
Denmark: +45 69 91 88 67
Spain: 34 955320871
Finland: +358 942 415 783
France: +33 (0) 182 880 461
United Kingdom: +44 (0) 121 368 0268
Ireland: +353 (0) 14 845 981
Italy: 39 0553989568
Netherlands: +31 (0) 708 912 516
Norway: +47 21 04 29 11
New Zealand: +64 (0) 9 984 9498
Sweden: +46 (0) 852 503 472
United States: +1 484 589 1020
Access Code: 944-436-426
Audio PIN: Shown after joining the meeting

Meeting ID: 944-436-426 !DSPAM:14,4b9e52d427007277318751!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20100317/596bac54/attachment.html>