[step-manufacturing] Reminder and slides on 3-axis Boxy

[Martin Hardwick]

All,

The conference call is at the regular times this Wednesday - see 
below for connection information.

We have a new set of slides showing the recommended procedure for 
machining the Boxy part on a 3-axis machine and a pdf showing the 
recommended tolerances.

ftp://ftp.steptools.com/private/Bath/Boxy_Part_3-Axis_Machining.ppt
ftp://ftp.steptools.com/private/Bath/Boxy_Part_IPMs.pdf

Martin Hardwick
Team Leader



>All,
>
>As agreed last week we will have weekly calls until Bath. Therefore, 
>the next conference call is this Wednesday.
>
>Issues to be addressed:
>
>1. How to define the setup in machine coordinates. Please see two 
>slides prepared by KTH.
>
>ftp://ftp.steptools.com/private/Bath/Coordinate_System_Transformation.ppt
>
>2. Progress reports on preparation for the Bath demonstrations
>
>3. Continuation on the discussion on how to capture the data needed 
>to estimate power consumption
>
>Martin
>
>+++++++++++++++++++++++++++++
>
>The bi-weekly conference call is this Wednesday September 2nd at 
>4:30PM France, 10:30AM Eastern and 7:30AM Western .. See below for 
>connection information.
>
>1.  Please join my meeting.
><https://www1.gotomeeting.com/join/611510273>https://www1.gotomeeting.com/join/611510273
>
>2.  Use your microphone and speakers (VoIP) - a headset is 
>recommended.  Or, call in using your telephone.
>
>Australia: +61 (0) 2 8014 4937
>Austria: +43 (0) 7 20881406
>Switzerland: +41 (0) 225 3314 54
>Germany: +49 (0) 892 2061 168
>France: +33 (0) 182 880 462
>United Kingdom: +44 (0) 203 318 4724
>Italy: +39 0247921241
>New Zealand: +64 (0) 9 925 0313
>Sweden: +46 (0) 852 503 473
>United States: 909-259-0010
>Access Code: 611-510-273
>!DSPAM:14,4a9c2fdc184849844116898!
>_______________________________________________
>step-manufacturing mailing list
>step-manufacturing at steptools.com
>http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
>
>!DSPAM:14,4a9c2fdc184849844116898!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20090901/e541d7da/attachment.htm>