[step-manufacturing] Sixth Dallas Conference call on Wednesday

[Martin Hardwick]

All,

The sixth conference call is this Wednesday September 19th at 4:30PM 
France, 3:30PM UK, 10:30 AM Eastern, 9:30AM Central and 7:30AM Western.

The agenda is as follows:

1. Review of first STEP-NC AP-238 data sets (to be posted to ftp site 
by Wednesday)
2. Review of draft agenda for meeting (see below)
3. Any other issues

The toll-free call in number for the USA is 1-866-481-9887. The call 
in numbers for Sweden and the UK are shown below and the URL gives a 
list of numbers for a wide range of other countries.

>    * Dial one of the listed local numbers to join the meeting
>    * Sweden:         +46 (0) 8 503 163 00 or 0200 89 70 70
>    * Germany:        +49 (0) 69 222 220 499  or 0800 000 1136
>    * UK:        +44 (0) 207 107 0610  or 0800 376 5610
>    * Enter Host-ID:   95967
>    * Enter PIN-code:  4544
>    * additional local numbers:
>  http://local.meet24.com/


http://airbus.webex.com
Topic: 3 October - dallas preparation
Date: Wednesday, October 3, 2007
Time: 4:30 pm, Europe Daylight Time (GMT +02:00, Paris)
Meeting number: 411 046 784
Meeting password: 20071003

Draft Agenda
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

1. Monday Afternoon October 29th

No meeting planned

2. Tuesday Morning October 30th

Review of AP status
AP-238 e2 model for Plate Cutting - Joint meeting with shipbuilding
AP-238 e2 model for Traceability

3. Wednesday October 31st

Review of HiPP model extension to AP-238 e2
         - Measurement features
         - Measurement planning
         - Measurement operations
         - Measurement results
         - Measurement evaluation
Review of ISO 14649 status and patent issues

4. Thursday November 1st

Manufacturing demonstration
         - Discussion of machining procedures
         - Discussion of data assembly and representation
         - Discussion and evaluation of inspection results

Machining model extensions for AP-238 e2
         - helical toolpaths
         - Cutter cross section for feed and speed optimization
         - Other

Planning for future meeting
         - Goals for next manufacturing demonstration
         - Goals for AP-238 edition 2
         - Goals for next meeting


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20070930/7262d1f4/attachment.htm>