[step-manufacturing] Reminder 5th conference call this Wednesday

[Martin Hardwick]

Our fifth conference call is on this Wednesday September 19th at 
4:30PM France, 3:30PM UK, 10:30 AM Eastern, 9:30AM Central and 7:30AM 
Western. The toll-free call in number for the USA is 1-866-481-9887. 
The call in numbers for Sweden and the UK are shown below and the URL 
gives a list of numbers for a wide range of other countries. Many 
thanks to Sandvik for providing this service.

>    * Dial one of the listed local numbers to join the meeting
>    * Sweden:         +46 (0) 8 503 163 00 or 0200 89 70 70
>    * Germany:        +49 (0) 69 222 220 499  or 0800 000 1136
>    * UK:        +44 (0) 207 107 0610  or 0800 376 5610
>    * Enter Host-ID:   95967
>    * Enter PIN-code:  4544
>    * additional local numbers:
>  http://local.meet24.com/

The agenda is:

1. Feedback from the HiPP team on the best procedures to use for the 
measurement operations.
2. Discussion on participation
3. Discussion on demo logistics and schedule
4. Discussion on how to view the results of the roughing operation

*************************************

Schedule
--------------

November 1st            - Machining demonstration
October 24th            - Finish machining tests
October 10th            - Begin machining tests
October 1st             - Finish tool path development
September 15th  - Begin tool path development

New Action Items
--------------------------
Shaw Feng and HiPP team to review the inspection features suggested by Airbus
Chen-Han Lee to assist Bengt Olsson in converting the Sandvik rough 
model to AP-203

Old Action items
------------------------
David Loffredo and David Odendahl to investigate use of rotate 
command for two dimensional probing
Fred Proctor to prepare a welcome package for new organizations that 
want to join the demonstration
Xun Xu to review the welcome package and scenario documentation

Closed Action Items
-----------------------------
Martin Hardwick to send AP-203 file for the fish head to Len Slovensky
Len Slovensky to prepare a draft AIC for the inspection features
David Odendahl to contact Chen Han Lee of UGS and John Horst to 
contact John  Schafer of UGS about participating in the demonstration
Fred Proctor to investigate use of Pro/Manufacturing for developing 
fish head tool paths
Martin Hardwick to contact Prof. Kisinami about Far East 
participation in the demonstration
Alain Brail to contact Renishaw about using their macros for two 
dimensional (X and Y) probing
Martin Hardwick to send Catai data for the Ibusuki demonstration to Shaw Feng
Len Slovensky to investigate developing an AP-224 file with the 
tolerances for the fish head part as a substitute AP-203 e2 file
John Horst to assist Ray Admire in contacting the Mori-Seiki tech center
Bengt Olsson to investigate requirements for optimal tool selection
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20070917/33d177c9/attachment.htm>