[step-manufacturing] Reminder - conference call today

[Martin Hardwick]

Our third conference call is on this Wednesday August 22nd at 4:30PM 
France, 3:30PM UK, 10:30 AM Eastern, 9:30AM Central and 7:30AM 
Western. The toll-free call in number for the USA is 1-866-481-9887. 
The call in numbers for Sweden and the UK are shown below and the URL 
gives a list of numbers for a wide range of other countries. Many 
thanks to Sandvik for providing this service.

>    * Dial one of the listed local numbers to join the meeting
>    * Sweden:         +46 (0) 8 503 163 00 or 0200 89 70 70
>    * Germany:        +49 (0) 69 222 220 499  or 0800 000 1136
>    * UK:        +44 (0) 207 107 0610  or 0800 376 5610
>    * Enter Host-ID:   95967
>    * Enter PIN-code:  4544
>    * additional local numbers:
>  http://local.meet24.com/

The Webex site provided by Airbus is as follows:


>http://airbus.webex.com
>
>Topic: 3rd dallas demo teleconf
>Date: Wednesday, August 22, 2007
>Time: 4:30 pm, Europe Daylight Time (GMT +02:00, Paris)
>Meeting number: 412 036 041
>Meeting password: 20070822

Schedule
--------------
The schedule has been extended to include a new deadline of September 
1st when those participating should agree to commit resources for 
machining and inspecting the part and/or developing data.

November 1st            - Machining demonstration
October 24th            - Finish machining tests
October 10th            - Begin machining tests
October 1st             - Finish tool path development
September 15th  - Begin tool path development
September 1st           - Confirmation of participants

New Action Items
--------------------------
Martin Hardwick to send Catai data for the Ibusuki demonstration to Shaw Feng
Len Slovensky, Fred Proctor and Bengt Olsson to develop an AP-203 
model for the part after roughing (deadline next conference call)
John Horst to assist Ray Admire in contacting the Mori-Seiki tech center
Fred Proctor to develop a scenario for the demonstration showing data 
flows and responsibilities
Xun Xu to review the welcome package and scenario documentation

Old Action items
------------------------
Len Slovensky to investigate developing an AP-224 file with the 
tolerances for the fish head part as a substitute AP-203 e2 file 
(August 9th deadline)
John Horst and HIPP team to suggest which inspection features and 
operations should be included in the demonstration
David Loffredo and David Odendahl to investigate use of rotate 
command for two dimensional probing
Bengt Olsson to investigate requirements for optimal tool selection
Fred Proctor to prepare a welcome package for new organizations that 
want to join the demonstration

Closed Action Items
-----------------------------
Martin Hardwick to send AP-203 file for the fish head to Len Slovensky (done)
Len Slovensky to prepare a draft AIC for the inspection features (done)
David Odendahl to contact Chen Han Lee of UGS and John Horst to 
contact John  Schafer of UGS about participating in the demonstration
Fred Proctor to investigate use of Pro/Manufacturing for developing 
fish head tool paths
Martin Hardwick to contact Prof. Kisinami about Far East 
participation in the demonstration
Alain Brail to contact Renishaw about using their macros for two 
dimensional (X and Y) probing 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20070822/e00642e2/attachment.htm>