<html>
<body>
<br>
Our third conference call is on this Wednesday August 22nd at 4:30PM
France, 3:30PM UK, 10:30 AM Eastern, 9:30AM Central and 7:30AM Western.
The toll-free call in number for the USA is 1-866-481-9887. The call in
numbers for Sweden and the UK are shown below and the URL gives a list of
numbers for a wide range of other countries. Many thanks to Sandvik for
providing this service.<br><br><blockquote type=cite class=cite cite="">
<ol>
<li><font size=1>Dial one of the listed local numbers to join the meeting
<li>Sweden: +46 (0) 8 503
163 00 or 0200 89 70 70</font>
<li><font size=1>Germany: +49
(0) 69 222 220 499 or 0800 000 1136</font>
<li><font size=1>UK: +44 (0)
207 107 0610 or 0800 376 5610</font>
<li><font size=1>Enter Host-ID: 95967</font>
<li><font size=1>Enter PIN-code: 4544</font>
<li><font size=1>additional local numbers:</font>
</ol><font size=1 color="#0000FF"><u>
<a href="http://local.meet24.com/" eudora="autourl">
http://local.meet24.com/</a></u></font> </blockquote><br>
The Webex site provided by Airbus is as follows:<br><br>
<br>
<blockquote type=cite class=cite cite="">
<a href="http://airbus.webex.com/" eudora="autourl">
http://airbus.webex.com</a><br><br>
Topic: 3rd dallas demo teleconf <br>
Date: Wednesday, August 22, 2007 <br>
Time: 4:30 pm, Europe Daylight Time (GMT +02:00, Paris) <br>
Meeting number: 412 036 041 <br>
Meeting password: 20070822 </blockquote><br>
Schedule<br>
--------------<br>
The schedule has been extended to include a new deadline of September 1st
when those participating should agree to commit resources for machining
and inspecting the part and/or developing data.<br><br>
November 1st
<x-tab> </x-tab><x-tab>
</x-tab>- Machining
demonstration<br>
October 24th
<x-tab> </x-tab><x-tab>
</x-tab>- Finish
machining tests<br>
October 10th
<x-tab> </x-tab><x-tab>
</x-tab>- Begin machining
tests<br>
October 1st
<x-tab> </x-tab><x-tab>
</x-tab>- Finish tool
path development<br>
September 15th <x-tab> </x-tab>- Begin tool path development<br>
September
1st<x-tab> </x-tab><x-tab>
</x-tab>- Confirmation of
participants<br><br>
New Action Items<br>
--------------------------<br>
Martin Hardwick to send Catai data for the Ibusuki demonstration to Shaw
Feng<br>
Len Slovensky, Fred Proctor and Bengt Olsson to develop an AP-203 model
for the part after roughing (deadline next conference call)<br>
John Horst to assist Ray Admire in contacting the Mori-Seiki tech
center<br>
Fred Proctor to develop a scenario for the demonstration showing data
flows and responsibilities<br>
Xun Xu to review the welcome package and scenario documentation<br><br>
Old Action items<br>
------------------------<br>
Len Slovensky to investigate developing an AP-224 file with the
tolerances for the fish head part as a substitute AP-203 e2 file (August
9th deadline)<br>
John Horst and HIPP team to suggest which inspection features and
operations should be included in the demonstration<br>
David Loffredo and David Odendahl to investigate use of rotate command
for two dimensional probing<br>
Bengt Olsson to investigate requirements for optimal tool selection<br>
Fred Proctor to prepare a welcome package for new organizations that want
to join the demonstration<br><br>
Closed Action Items<br>
-----------------------------<br>
Martin Hardwick to send AP-203 file for the fish head to Len Slovensky
(done)<br>
Len Slovensky to prepare a draft AIC for the inspection features
(done)<br>
David Odendahl to contact Chen Han Lee of UGS and John Horst to contact
John Schafer of UGS about participating in the demonstration<br>
Fred Proctor to investigate use of Pro/Manufacturing for developing fish
head tool paths<br>
Martin Hardwick to contact Prof. Kisinami about Far East participation in
the demonstration<br>
Alain Brail to contact Renishaw about using their macros for two
dimensional (X and Y) probing</body>
</html>