[step-manufacturing] Wed conf call reminder and correction to webex address

[Martin Hardwick]

All,

Just a quick reminder about the conference call tomorrow and a 
correction for the webex address which should be 
http://airbus.webex.com. If you are joining for the first time it 
will take a few minutes to download some software so airbus will 
start the system at 4:20PM France, 10:20AM Eastern USA, 9:20PM 
Central USA and 7:20AM Western USA to give everyone some extra time.

The call in number is shown below.

Martin




>All,
>
>We will have our first conference call to prepare for the Dallas 
>machining demonstration on Wednesday, July 25 at 4:30 France, 10:30 
>Eastern USA and 7:30 Western USA. The call is in response to SC4 resolution 722
>
>Resolution 722 approved in Ibusuki requested the Secretariat solicit 
>SC4 experts desiring to participate in a demonstration of planning, 
>machining and measurement at the TC184/SC4 53rd Meeting in Dallas, 
>Texas.  SC4 experts interested in participating in this event are 
>requested to notify the SC4 Secretariat by email at 
><mailto:sc4sec at tc184-sc4.org>sc4sec at tc184-sc4.org not later that 2007-09-15.
>
>We will first discuss the results of the Ibusuki demonstration and 
>then start planning for the Dallas demonstration which is expected 
>to be similar to the Ibusuki demonstration but with more 
>participation, more automation and more accuracy. There is a web 
>site showing the Ibusuki results at: 
>http://www.steptools.com/library/stepnc/2007_ibusuki/
>
>Please forward this e-mail to anyone you think may be interested in 
>participating.
>
>The time of this call has been selected to be convenient for those 
>in Europe and the USA. Our apologies to potential participants in 
>the Far East, but you are also welcome to join and we will organize 
>a second call at a more convenient time if there is interest (please 
>send e-mail).
>
>The Webex for the meeting is at http://webex.airbus.com
>
>Topic: Ibusuki  report and Dallas preparation
>Date: Wednesday, July 25, 2007
>Time: 4:30 pm (16:30 in Paris), Europe Daylight Time (GMT +02:00, Paris)
>Meeting number: 411 187 940
>Meeting password: 20070725
>
>For audio please choose one of the following
>
>You may dial:                  +33 1 72 26 01 38
>All participants pin code is:  115332#
>During the teleconference, you can dial:
>*0 customer service on line
>*1 mute/unmute your own line
>
>You may open a WEB console: http://frgci1.arkadin.com
>with conference reference: 110159746
>
>Martin Hardwick
>Team Leader T24 STEP-Manufacturing
>
>
>!DSPAM:14,46a0e200210655294340976!
>_______________________________________________
>step-manufacturing mailing list
>step-manufacturing at steptools.com
>http://lists.steptools.com/mailman/listinfo/step-manufacturing
>
>
>!DSPAM:14,46a0e200210655294340976!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20070724/21398b82/attachment.htm>