<html>
<body>
<br>
All,<br><br>
Just a quick reminder about the conference call tomorrow and a correction
for the webex address which should be
<a href="http://airbus.webex.com/" eudora="autourl">
http://airbus.webex.com</a>. If you are joining for the first time it
will take a few minutes to download some software so airbus will start
the system at 4:20PM France, 10:20AM Eastern USA, 9:20PM Central USA and
7:20AM Western USA to give everyone some extra time.<br><br>
The call in number is shown below.<br><br>
Martin<br><br>
<br><br>
<br>
<blockquote type=cite class=cite cite="">All,<br><br>
We will have our first conference call to prepare for the Dallas
machining demonstration on Wednesday, July 25 at 4:30 France, 10:30
Eastern USA and 7:30 Western USA. The call is in response to SC4
resolution 722<br><br>
<font face="Tahoma" size=2><b>Resolution 722 approved in Ibusuki
requested the Secretariat solicit SC4 experts desiring to participate in
a demonstration of planning, machining and measurement at the TC184/SC4
53<sup>rd</sup> Meeting in Dallas, Texas. SC4 experts interested in
participating in this event are requested to notify the SC4 Secretariat
by email at
<a href="mailto:sc4sec@tc184-sc4.org">sc4sec@tc184-sc4.org</a> not later
that 2007-09-15.<br><br>
</b></font>We will first discuss the results of the Ibusuki demonstration
and then start planning for the Dallas demonstration which is expected to
be similar to the Ibusuki demonstration but with more participation, more
automation and more accuracy. There is a web site showing the Ibusuki
results at:
<a href="http://www.steptools.com/library/stepnc/2007_ibusuki/" eudora="autourl">
http://www.steptools.com/library/stepnc/2007_ibusuki/</a><br><br>
Please forward this e-mail to anyone you think may be interested in
participating. <br><br>
The time of this call has been selected to be convenient for those in
Europe and the USA. Our apologies to potential participants in the Far
East, but you are also welcome to join and we will organize a second call
at a more convenient time if there is interest (please send
e-mail).<br><br>
The Webex for the meeting is at
<a href="http://webex.airbus.com/" eudora="autourl">
http://webex.airbus.com</a><br><br>
Topic: Ibusuki report and Dallas preparation <br>
Date: Wednesday, July 25, 2007 <br>
Time: 4:30 pm (16:30 in Paris), Europe Daylight Time (GMT +02:00, Paris)
<br>
Meeting number: 411 187 940 <br>
Meeting password: 20070725 <br><br>
For audio please choose one of the following <br><br>
You may
dial:
+33 1 72 26 01 38<br>
All participants pin code is: 115332#<br>
During the teleconference, you can dial:<br>
*0 customer service on line<br>
*1 mute/unmute your own line<br><br>
You may open a WEB console:
<a href="http://frgci1.arkadin.com/" eudora="autourl">
http://frgci1.arkadin.com</a><br>
with conference reference: 110159746<br><br>
Martin Hardwick<br>
Team Leader T24 STEP-Manufacturing<br><br>
<br>
!DSPAM:14,46a0e200210655294340976! <br>
_______________________________________________<br>
step-manufacturing mailing list<br>
step-manufacturing@steptools.com<br>
<a href="http://lists.steptools.com/mailman/listinfo/step-manufacturing" eudora="autourl">
http://lists.steptools.com/mailman/listinfo/step-manufacturing</a><br><br>
<br>
!DSPAM:14,46a0e200210655294340976!</blockquote></body>
</html>