[step-manufacturing] Reminder AP-238 CC1 conference call at 2PM today

[Martin Hardwick]

All,

The telcon is at 2PM Eastern today at the number shown below.

Please take a look at the implementation guide and let us know
if you need additional information about how to read and write
a STEP CNC data file.

In this call we will talk about our plans to make example data
sets available for the next call, and our plans to make conformance
checking systems and tool path viewers available for the next call.

Martin Hardwick


>X-Sender: hardwick at localhost
>X-Mailer: QUALCOMM Windows Eudora Version 5.1
>Date: Tue, 16 Nov 2004 15:15:54 -0500
>To: irb at steptools.com, step-manufacturing at steptools.com,
>        st-announce at steptools.com
>From: Martin Hardwick <hardwick at steptools.com>
>X-Scanned-By: MIMEDefang 2.39
>Cc: 
>Subject: [IRB] AP-238 CC1 Implementation guide and 3rd telcon
>X-BeenThere: irb at steptools.com
>X-Mailman-Version: 2.1.5
>List-Id: Industry Review Board <irb.steptools.com>
>List-Unsubscribe: <http://lists.steptools.com/mailman/listinfo/irb>,
>        <mailto:irb-request at steptools.com?subject=unsubscribe>
>List-Archive: <http://lists.steptools.com/mailman/private/irb>
>List-Post: <mailto:irb at steptools.com>
>List-Help: <mailto:irb-request at steptools.com?subject=help>
>List-Subscribe: <http://lists.steptools.com/mailman/listinfo/irb>,
>        <mailto:irb-request at steptools.com?subject=subscribe>
>Sender: irb-bounces at steptools.com
>X-DSPAM-Result: Innocent
>X-DSPAM-Confidence: 0.9990
>X-DSPAM-Probability: 0.0000
>X-DSPAM-Signature: 419a60cf167686192892177
>
>All,
>
>The third telcon on AP-238 CC1 CNC Independent Tool Paths
>inter-operability testing has been scheduled as shown below.
>
>Date: 11/19/04 - Friday
>Time: 2:00-3:00 EST, 1:00-2:00 CST. 11:00-12:00 PST
>Telephone number: 1-866-350-0777 or 425-717-7000
>Passcode:69145#
>
>Many thanks to Boeing for hosting the call. 
>
>In this conference call the main discussion item will be the 
>AP-238 CC1 Implementation Guide prepared by David Odendahl of
>Boeing. In the last conference call many of you requested this
>guide to help you scope your projects. Please download the
>document in advance to prepare your questions.
>
>http://www.isd.mel.nist.gov/projects/stepnc/Implementing_AP238_Comments_Writing.doc
>
>If there is time we will also review an update to the STEP-NC
>FAQ posted at the following URL. We would like to hear your
>suggestions for enhancements and improvements.
>
>http://www.steptools.com/library/stepnc/faq/faq.html
>
>Finally, we will revisit the scenario document. The most significant
>change to this document since the last call is that GE Fanuc has
>agreed to supply a simulator for the meeting in February. 
>
>http://www.isd.mel.nist.gov/projects/stepnc/pilot-scenario.pdf
>
>I want to emphasize again that the call is open to all including 
>International participants. We would very much like to extend
>the lists of participants and systems shown in the scenario
>document.
>
>Martin Hardwick
>
>_______________________________________________
>IRB mailing list
>IRB at steptools.com
>http://lists.steptools.com/mailman/listinfo/irb
>
>
>!DSPAM:419a60cf167686192892177!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Implementing_AP238_Comments_Writing.doc
Type: application/msword
Size: 96256 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20041119/e4d66b2e/attachment.doc>