<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Attendees
<br>
--------------
<br>
Martin Hardwick, STEP Tools, USA
<br>
David Loffredo, STEP Tools, USA
<br>
Mikael Hedlind, KTH, Sweden
<br>
Magnus Lundgren, KTH, Sweden<br>
Bengt Olsson, Sandvik, Sweden
<br>
Leon Xu, Boeing, USA
<br>
Sid Venkatesh, Boeing, USA<br>
David Odendahl, Boeing, USA<br>
Fred Proctor, NIST, USA
<br>
Ronnie Fesperman, NIST, USA
<br>
Bob Erickson, Pratt & Whitney, USA
<br>
Vincent Marchini, Ameritech, USA
<br>
Alain Brail, Airbus (retired), France
<br>
Doron Cohen, ISCAR, Israel<br>
Ian Stroud, EPFL, Switzerland<br>
David Madeley, Siemens NX CAM, UK<br>
<br>
We agreed on an agenda for the Stockholm meeting. A goal for the
meeting will be to develop STEP and STEP-NC usage cases to present
to the cutting tool and machine tool vendors at IMTS in Chicago in
September. <br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/T24_Stockholm2_Agenda.pdf">ftp://ftp.steptools.com/private/Stockholm2/T24_Stockholm2_Agenda.pdf</a><br>
<br>
We discussed the machining accuracy demonstration and after the
meeting the following schedule was developed to show the tasks that
need to be completed before each conference call between now and
Thursday June 14th demonstration.<br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/Stockholm_Schedule.gif">ftp://ftp.steptools.com/private/Stockholm2/Stockholm_Schedule.gif</a><br>
<br>
The next completion item is for the participating cutting tool
vendors to make cutting tool recommendations so that the data can be
added to the STEP-NC program. This item along with a first set of
measurements for the machine tool positional accuracy should be
ready in time for the next conference call.<br>
<br>
The full demonstration scenario is as listed below:<br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/STEP_manufacturing_demo_scenario_14_June_2012.pdf">ftp://ftp.steptools.com/private/Stockholm2/STEP_manufacturing_demo_scenario_14_June_2012.pdf</a><br>
<br>
The current STEP-NC program is here:<br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/Data/20120405_Crown_Wheel_Setup_1_and_2.238">ftp://ftp.steptools.com/private/Stockholm2/Data/20120405_Crown_Wheel_Setup_1_and_2.238</a><br>
<br>
The Mastercam data that was used to make the STEP-NC program is
here:<br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/Data/20120405_CROWN_WHEEL.EMCX-5">ftp://ftp.steptools.com/private/Stockholm2/Data/20120405_CROWN_WHEEL.EMCX-5</a><br>
<br>
Registration for the meeting is at the following web site. The
STEP-Manufacturing team is staying at the Scandic Malmen Hotel<br>
<pre wrap=""><big><big><a class="moz-txt-link-freetext" href="http://www.sis.se/sc4" moz-do-not-send="true">http://www.sis.se/sc4</a>
</big></big>
</pre>
A recording of this conference call is available at the following
ftp. The next conference call will be at the regular times on
Wednesday May 2nd.<br>
<br>
<a class="moz-txt-link-freetext" href="ftp://ftp.steptools.com/private/Stockholm2/stepmanuf_telecon_20120418.wmv">ftp://ftp.steptools.com/private/Stockholm2/stepmanuf_telecon_20120418.wmv</a><br>
<br>
Action Items<br>
-----------------<br>
1. Sandvik and ISCAR to make tooling recommendations.<br>
2. KTH to add the tooling recommendations to the STEP-NC program for
the crown wheel<br>
3. KTH to make positional accuracy measurements for the Mazak and
Hermle machines<br>
4. NIST to contact Kennametal about participation in the meeting and
demonstration<br>
5. STEP Tools and KTH to make straw man agreement for representation
of ISO13399 information in STEP<br>
6. Boeing to contact IMTS to make room reservations for a meeting
with the tool and machine vendors<br>
<br>
<br>
</body>
</html>