<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type" content="text/html;
charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
Attendees <br>
Martin Hardwick, STEP Tools, USA <br>
David Loffredo, STEP Tools, USA <br>
Vincent Marchini, Ameritech, USA <br>
Rich Morihara, Boeing, USA <br>
David Odendahl, Boeing, USA <br>
Magnus Lundgren, KTH, Sweden <br>
Fred Proctor, NIST, USA <br>
Sid Venkatesh, Boeing, USA <br>
Fiona Zhao, NIST,/New Zealand <br>
<br>
Apologies for Absence <br>
Bengt Olsson, Sandvik, Sweden <br>
Bob Erickson, Pratt & Whitney, USA <br>
Alain Brail, AlBavis, France <br>
Mikael Hedlind, KTH, Sweden <br>
Wen Jiang, Boeing, USA <br>
Leon Xu, Boeing, USA <br>
Richard Zuray, Boeing, USA <br>
<br>
<big><big><font size="1"><big><big>We reviewed the Renton_Boxy data
set. Boeing now has the golden copy and David Odendahl is
editing the feeds and speeds for machining on the Okuma in
aluminum.<br>
<br>
<a class="moz-txt-link-freetext"
href="ftp://www.steptools.com/private/Renton/demo/Boxy_Renton_compensation_demo_3.stpnc">ftp://www.steptools.com/private/Renton/demo/Boxy_Renton_compensation_demo_3.stpnc</a><br>
<br>
We discussed the issue with fixtures and decided that it
was not necessary for the fixture model to be 100%
accurate for this demonstration. In a future demonstration
the fixture model can be animated so that its dimensions
change to fit the results of the measurements.<br>
<br>
This was the last conference call for the Renton round. A
recording is at the URL below.<br>
<a class="moz-txt-link-freetext"
href="ftp://www.steptools.com/private/Renton/stepmanuf_telecon_20101006.wmv">ftp://www.steptools.com/private/Renton/stepmanuf_telecon_20101006.wmv</a><br>
<br>
<br>
<br>
</big></big></font></big></big><font size="1"><br>
</font><br>
</body>
</html>