<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="content-type"
content="text/html; charset=ISO-8859-1">
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
All,<br>
<br>
I propose the following agenda for the call today:<br>
<br>
1. Scope of the demonstration<br>
2. Tasks necessary to prepare for the demonstration<br>
3. Scope and content of the closed loop information model<br>
<br>
Martin<br>
<br>
<br>
-------- Original Message --------
<table class="moz-email-headers-table" border="0" cellpadding="0"
cellspacing="0">
<tbody>
<tr>
<th align="RIGHT" nowrap="nowrap" valign="BASELINE">Subject: </th>
<td>[step-manufacturing] Renton Conference Call #2</td>
</tr>
<tr>
<th align="RIGHT" nowrap="nowrap" valign="BASELINE">Date: </th>
<td>Mon, 09 Aug 2010 10:27:12 -0400</td>
</tr>
<tr>
<th align="RIGHT" nowrap="nowrap" valign="BASELINE">From: </th>
<td>Martin Hardwick <a class="moz-txt-link-rfc2396E" href="mailto:hardwick@steptools.com"><hardwick@steptools.com></a></td>
</tr>
<tr>
<th align="RIGHT" nowrap="nowrap" valign="BASELINE">Organization:
</th>
<td>STEP Tools, Inc.</td>
</tr>
<tr>
<th align="RIGHT" nowrap="nowrap" valign="BASELINE">To: </th>
<td><a class="moz-txt-link-abbreviated" href="mailto:step-manufacturing@steptools.com">step-manufacturing@steptools.com</a>
<a class="moz-txt-link-rfc2396E" href="mailto:step-manufacturing@steptools.com"><step-manufacturing@steptools.com></a></td>
</tr>
</tbody>
</table>
<br>
<br>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
<br>
All,<br>
<br>
The second conference call for the Renton round will be held this
Wednesday at the usual times. See below for connection information.
There will be several items to consider including the message below
from Alain.<br>
<br>
Martin<br>
<br>
<pre wrap="">Hi Martin,
Despite the short delay to develop the Renton demo, I would suggest:
1 - you replace 2 opposite sides of the boxy by a NAS979 circle-square-diamond test part (one side as usual, the opposite one in hollow). Machining of this test part is well known and industry will be happy to see the integration of measuring devices (RENISHAW and FARO arm), to check the quality of machining and they will be more confident in AP238 functionalities.
2 - Is there some benefit to define setups that are rotated by 45° around the Z axis?
- compensation of misalignement is more accurate?
- greater acceleration, shorter time to speed up and down, x and y drives instead of only one?
3 - About the functionalities demonstrated, it will be interesting to produce an inspection record sheet to demonstrate the part machined complies with tolerances and quality requirements including the "as is" final AP203 file.
These points must be discussed before making the best decision.
Alain Brail
Albavis
</pre>
<br>
<br>
<font face="Verdana" size="1">1. Please join the meeting.<br>
</font><a moz-do-not-send="true"
href="https://www2.gotomeeting.com/join/907143043"><font face="Verdana"
size="1">https://www2.gotomeeting.com/join/907143043</font></a><font
face="Verdana" size="1"><br>
<br>
2. Use your microphone and speakers (VoIP) - a headset is recommended.
Or, call in using your telephone.<br>
<br>
Australia: +61 (0) 7 3123 6029<br>
Austria: +43 (0) 7 20881400<br>
Belgium: +32 (0) 92 98 0592<br>
Canada: +1 416 800 9289<br>
Switzerland: +41 (0) 225 3314 51<br>
Germany: +49 (0) 898 7806 6461<br>
Denmark: +45 69 91 88 62<br>
Spain: +34 911829782<br>
Finland: +358 942 415 778<br>
France: +33 (0) 182 880 456<br>
United Kingdom: +44 (0) 203 355 7647<br>
Ireland: +353 (0) 14 845 976<br>
Italy: +39 0247921239<br>
Netherlands: +31 (0) 208 080 379<br>
Norway: +47 21 03 58 96<br>
New Zealand: +64 (0) 4 974 7215<br>
Sweden: +46 (0) 313 613 558<br>
United States: +1 516 453 0011<br>
Access Code: 907-143-043<br>
Audio PIN: Shown after joining the meeting</font><br>
!DSPAM:14,4c601012175031681617146!
</body>
</html>