<html>
<body>
Attendees<br>
---------------<br>
Martin Hardwick, STEP Tools<br>
David Loffredo, STEP Tools<br>
Magnus Lundgren, KTH<br>
Bengt Olsson, Sandvik<br>
Larry Maggiano, Mitutoyo<br>
Fred Proctor, NIST<br>
Alain Brail, AlBavis<br>
Mikael Hedlind, KTH<br>
Chris Pfeifer CCAT<br>
Brian Kindilein, CCAT<br>
Ian Stroud, EPFL<br>
Sid Venkatesh, Boeing<br>
Stephen Newman, University of Bath<br><br>
Apologies for Absence<br>
--------------------------------<br>
Aydin Nassehi, University of Bath<br>
Leon Xu, Boeing<br>
Robert Erickson, Pratt and Whitney<br>
David Odendahl, Boeing<br><br>
The first version of the Boxy part has been made on a three axis Hardinge
machine at Scania. <br><br>
<a href="ftp://ftp.steptools.com/private/Bath/first_boxy.JPG" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/first_boxy.JPG</a><br><br>
Three, four and five axis versions of the Boxy data are available on the
ftp site.<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_3-Axis_Machining_6_Setups1.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_3-Axis_Machining_6_Setups1.238<br>
</a>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_4-Axis_Machining_2_Setups1.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_4-Axis_Machining_2_Setups1.238</a>
<br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_5-Axis_Machining_2_Setups4.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_5-Axis_Machining_2_Setups4.238</a>
<br><br>
If there is time we will measure the Boxy part on Wednesday afternoon at
Bath. The critical dimensions are those for the cylindrical hole as shown
on Operation 19 on the four axis data. Boeing, Bath, CCAT, Scania and KTH
are planning to machine the part on a total of 7 different
machines.<br><br>
The STEP-NC data for moldy has been updated so that it uses mm units for
all components including the toolpaths which were stored in inch units in
previous versions.<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Moldy_Bath_Metric_3Axis_v5.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Moldy_Bath_Metric_3Axis_v5.238</a>
<br><br>
The agenda for the meeting has been adjusted so that the Boxy part will
be discussed in the morning and the Moldy part in the afternoon. The new
agenda is on the ftp site:<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/T24BathAgenda.pdf" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/T24BathAgenda.pdf</a><br><br>
The new agenda allows more participation from the United States during
the discussion of Moldy. A Goto meeting site has been created for this
participation at the coordinates listed below.<br><br>
A recording of this conference call is at:
<a href="ftp://ftp.steptools.com/private/Bath/stepmanuf_telecon_20090916.wmv" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/stepmanuf_telecon_20090916.wmv<br>
<br>
</a>
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++<br>
<font size=2>A conference call for Modly demonstration at Bath is
scheduled for this Thursday September 24th at 2:00PM UK, 9:00AM Eastern
and 6:00AM Western. See below for connection information. <br><br>
</font><font face="Verdana" size=2>1. Please join the meeting.<br>
</font><font face="Verdana" size=2 color="#0000FF">
<a href="https://www1.gotomeeting.com/join/897413688">
https://www1.gotomeeting.com/join/897413688<br><br>
</a></font><font face="Verdana" size=2>2. Use your microphone and
speakers (VoIP) - a headset is recommended. Or, call in using your
telephone.<br><br>
Australia: +61 (0) 8 6365 4094<br>
Austria: +43 (0) 7 20881401<br>
Switzerland: +41 (0) 225 3314 52<br>
Germany: +49 (0) 892 2061 163<br>
France: +33 (0) 182 880 457<br>
United Kingdom: +44 (0) 203 051 4835<br>
Italy: +39 0553989566<br>
New Zealand: +64 (0) 9 909 7884<br>
Sweden: +46 (0) 852 503 470<br>
United States: +1 516 453 0012<br>
Access Code: 897-413-688<br>
Audio PIN: Shown after joining the meeting<br><br>
Meeting ID: 897-413-688<br>
</font></body>
</html>