<html>
<body>
<br><br>
1. An updated slide set on the setup and coordinate transformation
issue<br>
<a href="ftp://ftp.steptools.com/private/Bath/Coordinate_System_Transformation.ppt" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Coordinate_System_Transformation.ppt<br>
<br>
</a>2. Slides on a new issue on how to define tolerances between
cylinders and between a cylinder and a face<br>
<a href="ftp://ftp.steptools.com/private/Bath/Face-To_Cylinder_Tolerance_Relation.ppt" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Face-To_Cylinder_Tolerance_Relation.ppt</a>
<br><br>
3. A cutting tool list for Boxy <br>
<a href="ftp://ftp.steptools.com/private/Bath/KTH-BT40%20tools.pdf" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/KTH-BT40%20tools.pdf</a><br><br>
4. JPEGs sent to us by Bob Erickson of Pratt and Whitney showing how
setups are defined in Vericut<br>
<a href="ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_1.jpg" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_1.jpg</a><br>
<a href="ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_2.jpg" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_2.jpg</a><br>
<a href="ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_3.jpg" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Vericut_Multiple_Setup_3.jpg</a><br>
<br>
Martin<br><br>
<br>
<blockquote type=cite class=cite cite="">All,<br><br>
The conference call is at the regular times this Wednesday - see below
for connection information.<br><br>
We have a new set of slides showing the recommended procedure for
machining the Boxy part on a 3-axis machine and a pdf showing the
recommended tolerances.<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_3-Axis_Machining.ppt" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_3-Axis_Machining.ppt</a>
<br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_IPMs.pdf" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_IPMs.pdf</a><br><br>
Martin Hardwick<br>
Team Leader<br><br>
<br><br>
<blockquote type=cite class=cite cite="">All,<br><br>
As agreed last week we will have weekly calls until Bath. Therefore, the
next conference call is this Wednesday.<br><br>
Issues to be addressed:<br><br>
1. How to define the setup in machine coordinates. Please see two slides
prepared by KTH.<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Coordinate_System_Transformation.ppt" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Coordinate_System_Transformation.ppt</a>
<br><br>
2. Progress reports on preparation for the Bath demonstrations<br><br>
3. Continuation on the discussion on how to capture the data needed to
estimate power consumption<br><br>
Martin<br><br>
+++++++++++++++++++++++++++++<br><br>
The bi-weekly conference call is this Wednesday September 2nd at 4:30PM
France, 10:30AM Eastern and 7:30AM Western .. See below for connection
information. <br><br>
1. Please join my meeting.<br>
<font color="#0000FF">
<a href="https://www1.gotomeeting.com/join/611510273">
https://www1.gotomeeting.com/join/611510273<br><br>
</a></font>2. Use your microphone and speakers (VoIP) - a headset
is recommended. Or, call in using your telephone.<br><br>
Australia: +61 (0) 2 8014 4937<br>
Austria: +43 (0) 7 20881406<br>
Switzerland: +41 (0) 225 3314 54<br>
Germany: +49 (0) 892 2061 168<br>
France: +33 (0) 182 880 462<br>
United Kingdom: +44 (0) 203 318 4724<br>
Italy: +39 0247921241<br>
New Zealand: +64 (0) 9 925 0313<br>
Sweden: +46 (0) 852 503 473<br>
United States: 909-259-0010<br>
Access Code: 611-510-273<br><br>
_______________________________________________<br>
step-manufacturing mailing list<br>
step-manufacturing@steptools.com<br>
<a href="http://lists.steptools.com/mailman/listinfo/step-manufacturing" eudora="autourl">
http://lists.steptools.com/mailman/listinfo/step-manufacturing</a><br><br>
<br>
!DSPAM:14,4a9c2fdc184849844116898!</blockquote>
!DSPAM:14,4a9d932160282418912320! <br>
_______________________________________________<br>
step-manufacturing mailing list<br>
step-manufacturing@steptools.com<br>
<a href="http://lists.steptools.com/mailman/listinfo/step-manufacturing" eudora="autourl">
http://lists.steptools.com/mailman/listinfo/step-manufacturing</a><br><br>
<br>
!DSPAM:14,4a9d932160282418912320!</blockquote></body>
</html>