<html>
<body>
All,<br><br>
The bi-weekly conference call is this Wednesday. See below for connection
information. The agenda is as follows.<br><br>
1. Review the procedure for computing machine specific speeds and feeds.
The latest version of the data has the maximum spindle speed and tool
flute count parameters set. There is a new version of the explorer on our
home page which you will need if you want to see the new machine
parameter and tool flute values.<br><br>
<a href="ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/moldy_bath_metric_3axis_v2.238</a>
<br><br>
2. Review the Boxy data. There are three versions of the part - the first
has both setup's and the other two have one setup each. There are wmv
files for each setup. The wmv's are similar to the simulation shown in
the STEP-NC Explorer using Motion/Trunnion AC table. <br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_23-06-2009.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_23-06-2009.238</a><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_1.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_1.238</a><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_2.238" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy_Part_Setup_2.238</a><br><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%201.wmv" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%201.wmv</a><br>
<a href="ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%202.wmv" eudora="autourl">
ftp://ftp.steptools.com/private/Bath/Boxy%20Part%20Setup%202.wmv</a><br>
<br>
If you would like to review the Moldy or Boxy data you can do so using a
new NO-LICENSE-KEY version of the STEP-NC Explorer that is now available
on the web site. This no-license-key version has the functionality of the
regular version, except it will not save data. <br><br>
<a href="http://www.steptools.com/products/stepncmachine/download/" eudora="autourl">
http://www.steptools.com/products/stepncmachine/download/<br><br>
</a>Martin Hardwick<br>
Team Leader<br><br>
<br>
++++++++++++++++++++++++++++++++<br>
The bi-weekly conference call is this Wednesday July 1st at 4:30PM
France, 10:30AM Eastern and 7:30AM Western .. See below for connection
information. <br><br>
<font face="Verdana">1. Please join my meeting, Wednesday, July 1
at 4:30 PM W. Europe Daylight Time.<br>
</font><font face="Verdana" color="#0000FF">
<a href="https://www1.gotomeeting.com/join/370619425">
https://www1.gotomeeting.com/join/370619425<br><br>
</a></font><font face="Verdana">2. Use your microphone and speakers
(VoIP) - a headset is recommended. Or, call in using your
telephone. </font>(Participant chooses how to connect)<br><br>
<font face="Verdana">Australia: +61 (0) 3 9001 1183<br>
Austria: +43 (0) 72088 0449<br>
Belgium: +32 (0) 92 98 0142<br>
France: +33 (0) 182 880 271<br>
Germany: +49 (0) 895 4998 6514<br>
Italy: +39 (0) 289 03 86 00<br>
Netherlands: +31 (0) 708 912 539<br>
New Zealand: +64 (0) 9 925 0408<br>
Spain: +34 (0) 925 67 0950<br>
Sweden: +46 (0) 101 992 528<br>
Switzerland: +41 (0) 225 3309 56<br>
United Kingdom: +44 (0) 203 355 7649<br>
United States: +1 914 339 0034<br>
Access Code: 370-619-425</font> <font face="Verdana">and
"#"<br>
Audio PIN: Shown after joining the meeting and "#" (this is
optional, but good to use in order to get a name connected to the
voice)<br><br>
Meeting ID: 370-619-425</font> <br>
</body>
</html>