<html>
<body>
<br>
The bi-weekly conference call is this Wednesday May 6th at 4:30PM France,
10:30AM Eastern and 7:30AM Western .. See below for connection
information. <br><br>
1. Please join the meeting.<br>
<font color="#0000FF">
<a href="https://www1.gotomeeting.com/join/214180633">
https://www1.gotomeeting.com/join/214180633<br><br>
</a></font>2. Use your microphone and speakers (VoIP) - a headset
is recommended. Or, call in using your telephone.
(Participant chooses how to connect)<br><br>
Australia: +61 (0) 3 9001 1183<br>
Austria: +43 (0) 437 2088 0449<br>
Switzerland: +41 (0) 225 3309 56<br>
Germany: +49 (0) 895 4998 6514<br>
France: +33 (0) 489 610 185<br>
United Kingdom: +44 (0) 203 355 7649<br>
Italy: +39 (0) 289 03 86 00<br>
New Zealand: +64 (0) 9 925 0408<br>
Sweden: +46 (0) 101 992 528<br>
United States: +1 914 339 0034<br>
Access Code: 214-180-633<font face="Verdana"> and "#"<br>
</font>Audio PIN: Shown after joining the meeting<font face="Verdana">
and "#" (this is optional, but good to use in order to get a
name connected to the voice)<br><br>
</font>++++++++++++++++++++++++++++++++++++<br>
All,<br><br>
The next conference call will be held Wednesday May 6 at the regular
times.<br><br>
The Agenda items are:<br><br>
1. Progress on machining the part<br>
<x-tab> </x-tab>CCAT, KTH,
NIST, U. Bath, Al's Job Shop<br><br>
2. Progress on measuring the part<br>
<x-tab> </x-tab>
Mitutoyo<br><br>
3. Surface compensation<br>
<x-tab> </x-tab>Tool path
modification for ball nose milling<br><br>
<a href="ftp://ftp.steptools.com/private/Vancouver/Surface_compenstation.ppt" eudora="autourl">
ftp://ftp.steptools.com/private/Vancouver/Surface_compenstation.ppt<br>
</a></body>
</html>