<html>
<body>
<br>
All,<br><br>
I have made a new directory containing the data and codes for the
demonstration:<br><br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/</a><br><br>
This directory contains a new version of the STEP-NC Explorer (5.36) plus
data and codes for the two demonstration alternates.<br><br>
The new Explorer contains an updated export for Heidenhain and supports
Front, Back, Top, Side and Orthographic views.<br><br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/stepnc_5_36.msi" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/stepnc_5_36.msi</a><br><br>
The Fanuc and Siemens codes are in inch units. The Heidenhain codes are
in mm units. <br><br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.fanuc" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.fanuc</a>
<br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.mpf" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.mpf</a>
<br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.i" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.i</a>
<br><br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.fanuc" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.fanuc</a>
<br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.mpf" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.mpf</a>
<br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.i" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.i</a>
<br><br>
These files are quite large. The AP-238 files are smaller. The AP-238
files now contain the Sandvik ISO 13399 models for the tools.<br><br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.238" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_1_20080913.238</a>
<br>
<a href="ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.238" eudora="autourl">
ftp://ftp.steptools.com/private/CCAT/demo_data/impeller_alternate_2_20080913.238</a>
<br><br>
As a reminder the two alternates being explored for the demonstration
are:<br><br>
<font size=2><u>Do you think we should do alternative 1:</u></font>
<br><br>
<font size=2>To be machined during preparation:</font> <br>
<font size=2>r02
0/45/90/135/180/225/270/315</font> <br>
<font size=2>r03
0/45/90/135/180/225/270/315</font> <br>
<font size=2>r04
0/45/90/135/180/225/270/315</font> <br>
<font size=2>r07
0/45/90/135/180/225/270/315</font> <br>
<font size=2>r08
0/45/90/135/180/225/270/315</font> <br>
<font size=2>semi:</font> <br>
<font size=2>f01
0/45/90/135/180/225/270/315</font> <br>
<font size=2>f02
0/45/90/135/180/225/270/315</font> <br>
<font size=2>h02
0/45/90/135/180/225/270/315</font> <br><br>
<font size=2>To be machined during demo:</font> <br>
<font size=2>l01 0</font> <br>
<font size=2>l51 0</font> <br>
<font size=2>h01 0</font> <br>
<font size=2>finish:</font> <br>
<font size=2>f03 0</font> <br>
<font size=2>v01 0</font> <br>
<font size=2>v51 0</font> <br><br>
<br>
<font size=2><u>Do you think we should do alternative 2 (all machining
during demo):</u></font> <br><br>
<font size=2>roughing:</font> <br>
<font size=2>r02
-45/0/+45</font> <br>
<font size=2>r03
-45/0/+45</font> <br>
<font size=2>r04
-45/0/+45</font> <br>
<font size=2>r07
-45/0/+45</font> <br>
<font size=2>r08
-45/0/+45</font> <br>
<font size=2>semi:</font> <br>
<font size=2>f01 0/+45</font>
<br>
<font size=2>f02 0/+45</font>
<br>
<font size=2>h02
-45/0/+45</font> <br>
<font size=2>l01 0</font> <br>
<font size=2>l51 0</font> <br>
<font size=2>h01 0</font> <br>
<font size=2>finish:</font> <br>
<font size=2>f03 0</font> <br>
<font size=2>v01 0</font> <br>
<font size=2>v51 0</font> <br>
</body>
</html>