<html>
<body>
<br>
All,<br><br>
The webex site and conference call numbers are give below. <br><br>
Sandivk has been able to complete the roughing operation. Images of the
part are on the web site with the latest data and a set of PowerPoint
slides.<br><br>
<a href="ftp://www.steptools.com/private/Dallas/20071017_data/" eudora="autourl">
ftp://www.steptools.com/private/Dallas/20071017_data/</a><br><br>
We need to discuss the following issues:<br><br>
1. What is the difference between Manual mode and CNC mode in DMIS<br>
2. Is there a requirement to probe exactly the points given in
FisheadToleranceSuggestionsIssueC.ppt or will any related points be
sufficient.<br>
3. How to generate on-machine probing code that probes using one axis
only and without cosine errors.<br><br>
The following improvements have been made to the Sandvik data since the
last conference call:<br><br>
1. The UGS APT parser was changed so that each tool command makes a new
workingstep even if the tool change is redundant. This has resulted in
much more modular tool paths, see the slides in 20071017_status.ppt.<br>
2. The APT parser was changed to add approach and retract moves for the
following UDE operation. This change eliminated collisions at
Workingsteps 42 and 52.<br><br>
<x-tab> </x-tab><x-tab>
</x-tab>“$$UDE: <>
MOVE BACK <>/TYPE=MAX”<br><br>
3. The Manual DMIS mode code generator has been updated to conform to the
syntax given in FisheadToleranceSuggestionsIssueC.ppt. See
<a href="ftp://www.steptools.com/private/Dallas/20071017_data//private/Dallas/20071017_data/Dallas_sandvik2_inspection.dmi">
<pre>Dallas_sandvik2_inspection.dmi</a>
</pre><blockquote type=cite class=cite cite="">Hello Martin,<br>
Hello All,<br><br>
These are the details for the next conference call Wednesday, the
17th.<a href="http://airbus.webex.com/" eudora="autourl">
http://airbus.webex.com</a><br><br>
You have successfully scheduled the following meeting: <br><br>
Topic: DALLAS DEMONSTRATION <br>
Date: Wednesday, October 17, 2007 <br>
Time: 4:30 pm, Europe Daylight Time (GMT +02:00, Paris) <br>
Meeting number: 418 592 918 <br>
Meeting password: 20071017 <br><br>
Audio conference as per SANDVIK details.<br>
<x-tab> </x-tab><x-tab>
</x-tab>Dial one of the
listed local numbers to join the meeting
</blockquote><x-tab>
</x-tab><x-tab>
</x-tab>USA
1-866-481-9887.<br>
<blockquote type=cite class=cite cite=""><x-tab>
</x-tab><x-tab>
</x-tab>Sweden: +46 (0) 8
503 163 00 or 0200 89 70 70 <br>
<x-tab> </x-tab><x-tab>
</x-tab>Germany: +49 (0)
69 222 220 499 or 0800 000 1136 <br>
<x-tab> </x-tab><x-tab>
</x-tab>UK: +44 (0) 207
107 0610 or 0800 376 5610 <br>
<x-tab> </x-tab><x-tab>
</x-tab>France : 0800 778
455<br>
<x-tab> </x-tab><x-tab>
</x-tab>Enter Host-ID:
95967 <br>
<x-tab> </x-tab><x-tab>
</x-tab>Enter PIN-code:
4544 <br>
<x-tab> </x-tab><x-tab>
</x-tab>additional local
numbers: <br>
<<a href="http://local.meet24.com/" eudora="autourl">
http://local.meet24.com/</a>> <br>
</blockquote></body>
</html>