<html>
<body>
<br>
All,<br><br>
The information for the conference call is repeated below.<br><br>
The (3 so far) test data sets have been put onto the ftp site
at:<a href="ftp://www.steptools.com/private/Dallas/2008103_data/" eudora="autourl">
ftp://www.steptools.com/private/Dallas/2008103_data/</a>. <br><br>
The attachment describes the status of these data sets and will be
reviewed during the call. A copy of the attachment is in the same ftp
directory.<br><br>
I am looking forward to talking with you tomorrow.<br><br>
Martin Hardwick<br>
Team Leader STEP-Manufacturing<br>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++<br>
<br>
All,<br><br>
The sixth conference call is this Wednesday September 19th at 4:30PM
France, 3:30PM UK, 10:30 AM Eastern, 9:30AM Central and 7:30AM Western.
<br><br>
The agenda is as follows:<br><br>
1. Review of first STEP-NC AP-238 data sets (to be posted to ftp site by
Wednesday)<br>
2. Review of draft agenda for meeting (see below)<br>
3. Any other issues<br><br>
The toll-free call in number for the USA is 1-866-481-9887. The call in
numbers for Sweden and the UK are shown below and the URL gives a list of
numbers for a wide range of other countries.
<br><br><blockquote type=cite class=cite cite="">
<ol>
<li><font size=1>Dial one of the listed local numbers to join the meeting
<li>Sweden: +46 (0) 8 503
163 00 or 0200 89 70 70</font>
<li><font size=1>Germany: +49
(0) 69 222 220 499 or 0800 000 1136</font>
<li><font size=1>UK: +44 (0)
207 107 0610 or 0800 376 5610</font>
<li><font size=1>Enter Host-ID: 95967</font>
<li><font size=1>Enter PIN-code: 4544</font>
<li><font size=1>additional local numbers:</font>
</ol><font size=1 color="#0000FF"><u>
<a href="http://local.meet24.com/" eudora="autourl">
http://local.meet24.com/</a></u></font> </blockquote><br><br>
<a href="http://airbus.webex.com/" eudora="autourl">
http://airbus.webex.com<br>
</a>Topic: 3 October - dallas preparation <br>
Date: Wednesday, October 3, 2007 <br>
Time: 4:30 pm, Europe Daylight Time (GMT +02:00, Paris) <br>
Meeting number: 411 046 784 <br>
Meeting password: 20071003 <br><br>
Draft Agenda<br>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++<br>
<br>
1. Monday Afternoon October 29th<br><br>
No meeting planned<br><br>
2. Tuesday Morning October 30th<br><br>
Review of AP
status<x-tab> </x-tab><x-tab>
</x-tab><br>
AP-238 e2 model for Plate Cutting - Joint meeting with shipbuilding<br>
AP-238 e2 model for Traceability<br><br>
3. Wednesday October
31st<x-tab> </x-tab><x-tab>
</x-tab><br>
<x-tab> </x-tab><br>
Review of HiPP model extension to AP-238 e2<br>
<x-tab> </x-tab>-
Measurement features<br>
<x-tab> </x-tab>-
Measurement planning<br>
<x-tab> </x-tab>-
Measurement operations<br>
<x-tab> </x-tab>-
Measurement results<br>
<x-tab> </x-tab>-
Measurement evaluation<br>
Review of ISO 14649 status and patent issues<br><br>
4. Thursday November 1st<br><br>
Manufacturing demonstration<br>
<x-tab> </x-tab>-
Discussion of machining procedures<br>
<x-tab> </x-tab>-
Discussion of data assembly and representation<br>
<x-tab> </x-tab>-
Discussion and evaluation of inspection results<br><br>
Machining model extensions for AP-238 e2<br>
<x-tab> </x-tab>- helical
toolpaths<br>
<x-tab> </x-tab>- Cutter
cross section for feed and speed optimization<br>
<x-tab> </x-tab>-
Other<br><br>
Planning for future meeting<br>
<x-tab> </x-tab>- Goals
for next manufacturing demonstration<br>
<x-tab> </x-tab>- Goals
for AP-238 edition 2<br>
<x-tab> </x-tab>- Goals
for next meeting<br><br>
</body>
</html>