[step-manufacturing] Same STEP-NC part made on two PBF machines

[Martin Hardwick]

Paul,

Duncan is most welcome of course. He has been very helpful to WG15.

The new NAVAIR success (same STEP-NC PBF part made on two machines, by 
different organizations, at different locations) means we have to think 
carefully about what to promise for the DIS.

Keep small and promise what we have already done, or go big and announce 
the dawn of a new age :-)

Martin

On 6/13/2024 2:36 PM, Witherell, Paul W. (Fed) wrote:
>
> Thanks Martin, I’ll be able to attend most but happy to identify 
> Duncan as a delegate as well.
>
> -Paul
>
> *From:* Martin Hardwick <hardwick at steptools.com>
> *Sent:* Thursday, June 13, 2024 1:19 PM
> *To:* Odendahl, David J <david.j.odendahl at boeing.com>; 
> Bengt.Olsson at sandvik.com; David Loffredo <loffredo at steptools.com>; 
> Witherell, Paul W. (Fed) <paul.witherell at nist.gov>; Reynolds (US), 
> Carla E <Carla.E.Reynolds at boeing.com>
> *Subject:* Meeting to discuss the AP238 testing schedule
>
> All,
>
> I broadcast a message about planning the schedule for AP238 E4 DIS 
> testing to everyone on the mailing list, but of course as the "owners" 
> you all are the most invited.
>
> If you cannot attend, and cannot delegate a deputy, please let me know.
>
> Martin
>
> Martin Hardwick has invited you to AP238 E4 DIS testing plans
>
> *Title:*
>
> 	
>
> AP238 E4 DIS testing plans
>
> *Location:*
>
> 	
>
> Virtual Zoom
>
> *When:*
>
> 	
>
> Occurs every week effective 6/19/2024 until 6/26/2024 from 10:30 AM to 
> 11:30 AM.
>
> *Organizer:*
>
> 	
>
> Martin Hardwick <hardwick at steptools.com> <mailto:hardwick at steptools.com>
>
> *Description:*
>
> 	
>
> The ballot for the CD of AP238 E4 has been completed, so we need to 
> plan demonstrations to validate the DIS version. There are four 
> groups, working on four technologies:
>
> Powder Bed Fusion
> Composite Layup
> Drill and Fill
> Tool wear management
>
> This will mostly be an opportunity for coordination between the groups 
> to make sure that we have a collective schedule that will not cause 
> unnecessary delays, while also meeting all the requirements. If you 
> are an "owner" or principal participant in one of the technologies, 
> then please think about the scope of your demonstration, and how much 
> time is needed for preparation. The deadline for submitting the DIS to 
> ISO is the end of 2024, but the ISO process allows us to obtain an 
> extension for "industry testing" if necessary.
>
> Topic: AP238 ED4 DIS testing plans
> Time: Jun 19, 2024 10:30 AM Eastern Time (US and Canada)
>     Every week on Wed, 2 occurrence(s)
>     Jun 19, 2024 10:30 AM
>     Jun 26, 2024 10:30 AM
>     Please download and import the following iCalendar (.ics) files to 
> your calendar system.
>     Weekly: 
> https://iso.zoom.us/meeting/tJMvf--urjIpHNQsulS7qNU9BEfb3ZvlQ-kB/ics?icsToken=98tyKuCvrDMsHNScsx-HRowEAIqgM-7ziFhego1sjwrpMHdCTDavFMdEMOFFBtTh
>
> Join from PC, Mac, Linux, iOS or Android: 
> https://iso.zoom.us/j/97286609360?pwd=YHZvPpBjeqbol0xgYsmgF1Fax0z4mE.1
>     Password: 156016
>
> Or iPhone one-tap :
>     US: +16465189805,,97286609360#  or +16468769923,,97286609360#
> Or Telephone:
>     Dial(for higher quality, dial a number based on your current 
> location):
>         US: +1 646 518 9805  or +1 646 876 9923  or +1 470 381 2552  
> or +1 651 372 8299  or +1 786 635 1003  or +1 267 831 0333  or +1 301 
> 715 8592  or +1 312 626 6799  or +1 470 250 9358  or +1 206 337 9723  
> or +1 213 338 8477  or +1 253 215 8782  or +1 346 248 7799  or +1 408 
> 638 0968  or +1 602 753 0140  or +1 669 219 2599  or +1 669 900 6833  
> or +1 720 928 9299  or +1 971 247 1195  or 877 853 5247 (Toll Free) or 
> 888 788 0099 (Toll Free)
>     Meeting ID: 972 8660 9360
>     Password: 156016
>     International numbers available: https://iso.zoom.us/u/aBYI9mueY
>
> *Attendees:*
>
> 	
>
>   * Martin Hardwick <hardwick at steptools.com>
>     <mailto:hardwick at steptools.com>
>
>   * step-manufacturing at steptools.com
>
> On 6/10/2024 7:26 AM, Martin Hardwick wrote:
>
>     All,
>
>     Contacting you as the "owners" of the five components. See the
>     five documents on AP238.org: https://ap238.org/ap238e4/
>
>     In the next two weeks we should decide which can move forward to DIS.
>
>     The final decision is made by the Convenor and Chair (me and Kenny).
>
>     If necessary the ISO rules allow extra time for industry testing.
>
>     Martin
>
> -- 
> Martin Hardwick
> President STEP Tools, Inc.
> Cell: 518 253-0596
> Software for worldwide manufacturing
> "There are billions of STEP files and millions of STEP-NC files"

-- 
Martin Hardwick
President STEP Tools, Inc.
Cell: 518 253-0596
Software for worldwide manufacturing
"There are billions of STEP files and millions of STEP-NC files"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20240613/018bc33d/attachment.htm>