[step-manufacturing] Agenda for WG15 March Meeting

[Martin Hardwick]

All,

Here is the agenda for the upcoming meeting in Seattle (Renton).

Directions and hotel recommendations will follow.

Martin


  WG15 Digital Manufacturing


  AP238 Edition 4


    Monday March 11^th to Wednesday March 13^th , 2024


    _All Times are Seattle_


    Monday March 11^th (harmonization for AP238 Edition 4)

08:00Powder Bed Fusion model for AM reliability

10:30Drill and Fill model for air frame weight reduction

13:00Tape Layup model for composites interoperability

15:30Harmonization in the Committee Draft

17:30Close Meeting


    Tuesday March 12^th (workshop on toolpath efficiency)^

08:00STEP-CLI toolpath proposal

10:30Toolpath compression for powder bed fusion

13:00Toolpath compression for composite layup

15:30Toolpath compression for cutter parameters

17:30Close Meeting


    Wednesday March 13^th (Digital Twin and UUID demonstrations)

08:00Drill and Fill in the “Gauntlet” cage

09:30Cutter Optimization

10:30Tape Layup

11:30Powder Bed Fusion

-- 
Martin Hardwick
President STEP Tools, Inc.
Cell: 518 253-0596
"There are billions of STEP files and millions of STEP-NC files"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20240112/6fbde01b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WG15_Seattle_meeting_schedule.pdf
Type: application/pdf
Size: 118833 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20240112/6fbde01b/attachment.pdf>