[step-manufacturing] WHOOPS Attachment Re: Reminder and Agenda UUID conference call this Wednesday

Tue Oct 4 12:45:16 EDT 2022

I should be at that point (fastener definitions) after our internal meetings 10/27-10/29 in JPN.

Rocky Pinheiro, PhD.
Global Vice President of Quality and Innovation
rpinheiro at pemnet.com<mailto:rpinheiro at pemnet.com>
586-610-3500
[cid:image001.jpg at 01D8D7EF.264FCFF0]

From: Thomas Thurman <thomas.r.thurman at imonmail.com>
Sent: Tuesday, October 4, 2022 12:40 PM
To: Martin Hardwick <hardwick at steptools.com>
Cc: Thomas Thurman <thomas.r.thurman at imonmail.com>; step-manufacturing at steptools.com; Dave Loffredo <loffredo at steptools.com>; Allison Feeney, Feeney <abf at nist.gov>; Pinheiro, Rocky <RPinheiro at pemnet.com>
Subject: Re: [step-manufacturing] WHOOPS Attachment Re: Reminder and Agenda UUID conference call this Wednesday

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Martin,
0-The work is coming along nicely!
Unfortunately I have an unavoidable conflict tomorrow.

Some comments:
1- Hole ENTITY definitions
If one is going to adhere to the spirit of AP 242 in defining a hole depth,
the ARM should be consulted to determine what kind of hole is being designed and map that kind to the hole subtype that is appropriate in the ARM.
I would expect the same logic applies for AP 238 but Dave Loffredo would best to address that.

A brief survey of STEP ARM schemas reveals:
Basic_round_hole
Basic_round_hole_occurrence
Basic_round_hole_occurrence_in_assembly
Conical_hole_bottom
Conical_stepped_hole_transition
Counterbore_hole
Countersunk_hole
Explicit_composite_hole
Explicit_round_hole
Flat_hole_bottom
Flat_with_radius_hole_bottom
Flat_with_taper_hole_bottom
Md_counterbore_hole_definition
Md_counterbore_hole_occurrence
Md_counterbore_hole_occurrence_in_assembly
Md_counterdrill_hole_definition
Md_counterdrill_hole_occurrence
Md_counterdrill_hole_occurrence_in_assembly
Md_countersink_hole_definition
Md_countersink_hole_occurrence
Md_countersink_hole_occurrence_in_assembly
Panel_hole_with_barring
Plug_weld_in_circular_holes_definition
Round_hole
Simplified_md_counterbore_hole_definition
Simplified_md_counterdrill_hole_definition
Simplified_md_countersink_hole_definition
Simplified_spotface_hole_definition
Solid_with_conical_bottom_hole
Solid_with_flat_bottom_hole
Solid_with_spherical_bottom_hole
Solid_with_stepped_round_hole
Solid_with_stepped_round_hole_and_conical_transitions
Spherical_hole_bottom
Spotface_hole_definition

Some of these are 'design features' and some are 'manufacturing features'.
(Md acronym is used to avoid name space clashes).

and of course there is the MBx-IF recommended practices on PMI and user defined attributes.

2- page 10 questions.
Something to look at over the next week. I am not sure Rocky's team is at a point to answer the fastener products question.

I would prefer to recast the question:
"What features can represent a hole?" into
"What are recommendations from each (relevant) AP as to how to represent a particular kind of hole?"

regards,
Tom

> On Oct 4, 2022, at 10:29 AM, Martin Hardwick <hardwick at steptools.com<mailto:hardwick at steptools.com>> wrote:
>
> This time with the attachment
>
> On 10/4/2022 11:27 AM, Martin Hardwick wrote:
>> This weeks discussion will be on how to represent the engineering requirements identified by a UUID.
>>
>> For example, a hole depth could be represented by
>>
>> • A linear distance dimension
>> • A depth parameter on a design feature
>> • The linear path of a manufacturing feature
>> • The depth on a drilling operation
>> • The distance between two trim planes on a cylinder
>> • A "magic" string within a feature name
>> Topic: UUIDs for Digital Twins and the Digital Thread
>> Time: Oct 5, 2022 09:30 AM Eastern Time (US and Canada)
>> Every 2 weeks on Wed, until Oct 19, 2022, 2 occurrence(s)
>> Oct 5, 2022 09:30 AM
>> Oct 19, 2022 09:30 AM
>> Please download and import the following iCalendar (.ics) files to your calendar system.
>> Weekly: https://iso.zoom.us/meeting/tJ0rduusqzMiGNIo-f2SZ3yfhxpbdmF20zl5/ics?icsToken=98tyKuChqDooHtGduBuBRox5BIj4a-jwmFxHjY10k1LjURNpMRrwPvpSMLZyNoqA<https://iso.zoom.us/meeting/tJ0rduusqzMiGNIo-f2SZ3yfhxpbdmF20zl5/ics?icsToken=98tyKuChqDooHtGduBuBRox5BIj4a-jwmFxHjY10k1LjURNpMRrwPvpSMLZyNoqA>
>>
>> Join from PC, Mac, Linux, iOS or Android: https://iso.zoom.us/j/99612458826?pwd=QUdMUVZ6SWRFSU9lelgvbHJTSHp3QT09<https://iso.zoom.us/j/99612458826?pwd=QUdMUVZ6SWRFSU9lelgvbHJTSHp3QT09>
>> Password: 637948
>>
>> Or iPhone one-tap :
>> US: +16465189805,,99612458826# or +16468769923,,99612458826#
>> Or Telephone:
>> Dial(for higher quality, dial a number based on your current location):
>> US: +1 646 518 9805 or +1 646 876 9923 or +1 301 715 8592 or +1 312 626 6799 or +1 470 250 9358 or +1 470 381 2552 or +1 651 372 8299 or +1 786 635 1003 or +1 267 831 0333 or +1 408 638 0968 or +1 602 753 0140 or +1 669 219 2599 or +1 669 900 6833 or +1 720 928 9299 or +1 971 247 1195 or +1 206 337 9723 or +1 213 338 8477 or +1 253 215 8782 or +1 346 248 7799 or 877 853 5247 (Toll Free) or 888 788 0099 (Toll Free)
>> Meeting ID: 996 1245 8826
>> Password: 637948
>> International numbers available: https://iso.zoom.us/u/ac2xLhe49u<https://iso.zoom.us/u/ac2xLhe49u>
>>
>> Or Skype for Business (Lync):
>> https://iso.zoom.us/skype/99612458826<https://iso.zoom.us/skype/99612458826>
>>
>>
>>
>> --
>> Martin Hardwick
>> President STEP Tools, Inc.
>> Cell: 518 253-0596
>> "There are billions of STEP files and millions of STEP-NC files"
>>
> --
> Martin Hardwick
> President STEP Tools, Inc.
> Cell: 518 253-0596
> "There are billions of STEP files and millions of STEP-NC files"
>
> <UUID's_20221005.pdf>_______________________________________________
> step-manufacturing mailing list
> step-manufacturing at steptools.com<mailto:step-manufacturing at steptools.com>
> http://lists.steptools.com/mailman/listinfo/step-manufacturing<http://lists.steptools.com/mailman/listinfo/step-manufacturing>

Thomas Thurman
Principal Electrical Engineer, Rockwell Collins (Retired)

Confidentiality Notice: This e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete/destroy any and all copies of the original message.
E-mail transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late, incomplete, or
contain viruses. Therefore, the recipient should check this email and any attachments for the presence of viruses. The sender accepts no liability for any damage caused by any virus transmitted by this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20221004/1e22dff3/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3547 bytes
Desc: image001.jpg
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20221004/1e22dff3/attachment.jpg>