[step-manufacturing] Minutes of April 18 telecon

[sandra.haege-betz at advance-3d.de]

Dear Mr. Hardwick , 

 

I was wondering if the meeting today is cancelled ?

May you inform me please if there another login or I just didn’t saw the new date ?

 

As you can see a bit below in the Mail I show some for application for AR Technology and I would be very happy to discuss this topic also in your group maybe if its possible later on of course.

 

Thank so much 

Sandra

 

Beste Grüße , 

Best Regards

 

Sandra Häge-Betz

CEO



adVANCE3D GmbH

Ringstraße 3,97791 Obersinn, DEUTSCHLAND

Telefon:  +49 15143230846

E.-Mail    <mailto:sandra.haege-betz at advance-3d.de> sandra.haege-betz at advance-3d.de

E.-Mail :  <mailto:kontakt at advance-3d.de> kontakt at advance-3d.de

Website:  <http://www.advance-3d.de/> www.advance-3d.de

 



 

Hinweis: Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Die unerlaubte Weitergabe, Vervielfältigung oder Offenbarung ist nicht gestattet. Notice: This electronic mail contains confidential and/or privileged information only for the named recipient. Please note, that any unauthorized distribution, copying or disclosure ist strictly prohibited.

Sitz der Gesellschaft: Obersinn  HRB 13089 Geschäftsführer:Sandra Häge-Betz

 

 

Von: step-manufacturing <step-manufacturing-bounces at steptools.com> Im Auftrag von Martin Hardwick
Gesendet: Freitag, 20. April 2018 20:34
An: step-manufacturing at steptools.com
Betreff: [step-manufacturing] Minutes of April 18 telecon

 

Attendees: 

Martin Hardwick, STEP Tools, USA 
David Loffredo, STEP Tools, USA 
Leon Xu, Boeing, USA 
Sid Venkatesh, Boeing, USA 
Thanh Hyun, Okuma, USA 
Liming Li, JSL Innovations, USA
Larry Maggiano, Mitutoyo, USA
Clinton Christian, Renishaw, Canada 
Jay Um, DFK, Germany 
Daniel, Niederwestberg, DMG, Germany 
MIchael Kirbach, DMG, Germany 
Marco Elkendorf, DMG, Germany 
Alian Brail, Airbus (retired), France 
Bengt Olssen, Sandvik, Sweden
Mikael Hedlind, Scania, Sweden 

We reviewed the stage models for the grand challenge and decided to make open pockets for the stage 1 model, and to use stair steps for the stage 2 model (see below). 



We then reviewed the tooling and Sandvik made the suggestions in the attached document. They have questions about the shoulder radius of the tool that will be addressed in the next telecon on Wednesday April 25.

Martin Hardwick 
Convener WG15 Digital Manufacturing 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180425/264aa62e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 67833 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180425/264aa62e/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 5158 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180425/264aa62e/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.jpg
Type: image/jpeg
Size: 17736 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180425/264aa62e/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.jpg
Type: image/jpeg
Size: 40106 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20180425/264aa62e/attachment-0002.jpg>