[step-manufacturing] Reminder conference call today

[Martin Hardwick]

On 8/22/2016 9:07 AM, Martin Hardwick wrote:
>
> All,
>
> The conference call is this Wednesday at the regular times - 7AM 
> Pacific, 10AM Eastern, 3PM UK and 4PM Europe. The contact details are 
> repeated below for those of you who do not use an electronic calendar.
>
> We will discuss the first machining results for the following test 
> data. This data should be accessible to anyone with a browser or smart 
> phone:
>
> http://swim.steptools.com:8085/
>
> Category 	Item 	Description 	Date
> Setup 	Stock specifications 	Need stock dimensions and tolerances 
> 8/20/2016
> Setup 	Workpiece location 	Need work offset location relative to stock 
> features that we can measure 	8/20/2016
> Cutting tools 	Missing cutters 	We don't have two of the cutters 
> 8/20/2016
> Web interface 	Axis system display 	Helpful to have frame directions 
> displayed on screen 	8/20/2016
> Web interface 	Workpiece frame location 	Helpful to have workpiece 
> frame system displayed on screen 	8/20/2016
> Web interface 	Identify datum features 	Nice to be able to be able to 
> visually identify datum features.Like in STEP-NC Explorer. 	8/20/2016
> NC program 	No coolant commands 	Program does not turn coolant on/off 
> 8/20/2016
> NC program 	Slow -Z feed during setup 1 	During facing, the down move 
> after traverse across the part is very slow 	8/20/2016
> Setup 	Interefence on Setup 2 	The support parallel on the bottom of 
> the part in interfering with the un-cut surface of the part 	8/20/2016
> NC program 	Notes for operator 	Add notes in the program to let the 
> operator know what is going on 	8/20/2016
> NC program 	Conventional milling 	Is there a reason program does not 
> use climb cutting? 	8/20/2016
> Cutting tools 	Long 10mm tool 	Is long length required in later 
> operations? 	8/20/2016
> Cutting tools 	Short flute length 	Is there a reason a longer flute 
> length was not used when cutting sides? 	8/20/2016
> Video 	Camera position not optimal 	Camera needs to be higher to 
> prevent coolant from blocking view 	8/20/2016
> Setup 	Used Al 	Used aluminum 85x85x85mm block rather than Ti.We 
> discovered Ti block dimensions were not very close to the 
> specifications.Ti blocks were oversized by 2 to 3 mm. 	8/20/2016
>
>
>
> 7AM Pacific, 10AM Eastern, 3PM UK, 4PM Europe
> 1. Please join my meeting.
> https://www2.gotomeeting.com/join/285940474
>
> 2. Use your microphone and speakers (VoIP) - a headset is recommended. 
> Or, call in using your telephone.
>
> Australia: +61 2 6108 4655
> Austria: +43 (0) 7 2088 1403
> Belgium: +32 (0) 28 08 4294
> Canada: +1 (416) 800-9295
> Denmark: +45 (0) 69 91 88 65
> Finland: +358 (0) 942 41 5781
> France: +33 (0) 182 880 459
> Germany: +49 (0) 811 8899 6901
> Ireland: +353 (0) 14 845 979
> Italy: +39 0 699 36 98 81
> Netherlands: +31 (0) 208 080 382
> New Zealand: +64 (0) 4 974 7214
> Norway: +47 21 03 58 99
> Spain: +34 931 81 6669
> Sweden: +46 (0) 852 503 499
> Switzerland: +41 (0) 435 0167 09
> United Kingdom: +44 (0) 207 151 1857
> United States: +1 (619) 550-0006
>
> Access Code: 285-940-474
> Audio PIN: Shown after joining the meeting
>
>
> _______________________________________________
> step-manufacturing mailing list
> step-manufacturing at steptools.com
> http://lists.steptools.com/mailman/listinfo/step-manufacturing


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160824/e820bdb5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0531 (1280x853).jpg
Type: image/jpeg
Size: 356902 bytes
Desc: not available
URL: <http://lists.steptools.com/pipermail/step-manufacturing/attachments/20160824/e820bdb5/attachment.jpg>