[step-manufacturing] Minutes of January 7th conference call

[Martin Hardwick]

Attendees
--------------
Martin Hardwick, STEP Tools, USA
Joe Fritz, STEP Tools, USA
Julie Huang, Sandvik Sweden
Mikael Tedeborg, Sandvik, Sweden
Bengt Olsson, Sandvik, Sweden
Alain Brail, Airbus (retired), France
Christian Caillet, Datakit France
Bryan Dods, GE Power and Water, USA
Charles Gilman, GE Global Research, USA
David Odendahol, Boeing, USA
Sid Venkatesh, Boeing, USA
Vincent Marchetti, Ameritech, USA
Zhigang Wang, Makino, USA
Thanh Huynh, Okuma, USA
Tom Raun, Iscar, USA
Dan Finke, Penn State, USA

We reviewed the five year plan for STEP-NC Deployment. Suggestions were 
made to formulate the ideas on networked machining into a white paper, 
and to organize a workshop on Robot Machining.
ftp://www.steptools.com/private/CAM_exchange/Cycle_5/STEPNC_Roadmap_2015.pptx

Please register for the February 12th and 13th meeting as soon as possible.
ftp://www.steptools.com/private/CAM_exchange/Cycle_5/Registration_form.docx

A recording of this conference calls is on the web site at the address 
below:
ftp://www.steptools.com/private/CAM_exchange/Cycle_5/stepmanuf_telecon_20150107.wmv

The next conference call will be held on Wednesday January 21st.

Martin Hardwick
Team Leader ISO STEP-Manufacturing